© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Braided Wire Protection
Dimensions in Inches (millimeters) are subject to change without notice.
A
INDUSTRY-STANDARD METALLIC
EMI/RFI Braided Shielding
100-005 tin-plated copper-clad steel braid
How To Order
Sample Part Number 100005 A 203 L
Basic No. Tin-plated copper-covered steel braid
Wire Gage Code
A = 36 AWG
B = 34 AWG
Braid Diameter No. See Tables I or II
Lanyard Option L
= with lanyard Omit = no lanyard
Table I: AWG
Dash
No.
Nominal I.D.
Carriers
per Layer
Ends
per Layer
. (.)
. (.)
. (.)
. (.)
. (.)
. (.��)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. .
Table II: AWG
Dash
No.
Nominal I.D.
Carriers
per Layer
Ends
per Layer
. (.)
. (.)
. (.)
. (.)
��
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
. (.)
NOTES
1. Direct current ratings are given for information only. Values shown are for uninsulated
braid in free air, at 30°C (86°F). Actual values will depend on permissible temperature rise,
voltage drop and other conditions of service. Values should be de-rated if the braid is
insulated or in close contact with other components.
2. For current rating and weight, consult factory
3. Material/Finish:
Braid - Tin-plated copper-covered steel ASTM B520
Lanyard - Synthetic ber
100-005 TUBULAR METAL BRAID DRAWN TIN-PLATED COPPER-CLAD STEEL
INDUSTRY-STANDARD
Ç
METALLIC
EMI/RFI Shielding
INDUSTRY-STANDARD
Ç
METALLIC
EM
I/RFI Shielding
Soft-drawn tin-plated
copper-clad steel braid
Good H Field EMI
frequency effectiveness
175°C temperature
tolerant
175 lbs. pull strength
(.500 dia. braid)
96 hours salt spray
corrosion resistant
Good abrasion resistance
Multilaminar tin-plated copper-clad
steel braid is an extremely versatile
material. The steel core provides a
strong, high tensile strength base for
the more conductive copper cladding.
Exterior tin plating prevents oxidation
and corrosion.