Not Recommended for New Designs, Use F1772-2
F1772-3 300 V-X2
www.vishay.com
Vishay Roederstein
Revision: 24-Jun-13
1
Document Number: 28211
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Interference Suppression Film Capacitors
MKT Radial Potted Type
FEATURES
• 15 mm to 37.5 mm lead pitch
• Supplied loose in box, taped on reel
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
High stability grade for continuous across the line X2
applications.
See also application note: www.vishay.com/doc?28153
Note
•For more detailed data and test requirements, contact rfi@vishay.com
QUICK REFERENCE DATA
Capacitance range (E12 series)
E12 series 0.01 μF to 2.2 μF
preferred values acc. to E6
Capacitance tolerance ± 10 %, ± 20 %
Rated AC voltage 300 V
AC
; 50 Hz to 60 Hz
Permissible DC voltage
800 V
DC
at 85 °C
630 V
DC
at 110 °C
Climatic testing class acc. to IEC 60068-1 40/100/56/C
Maximum application temperature 100 °C
Reference standards
IEC 60384-14 ed-3 and EN 60384-14
IEC 60065 pass. flamm. class C
CSA-E384-14
UL 60384-14
Dielectric Polyester film
Electrodes Metallized
Construction
Series construction
Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Leads Tinned wire
Marking
C-value; tolerance; rated voltage; sub-class; manufacturer’s type;
code for dielectric material; manufacturer location; manufacturer’s logo;
year and week; safety approvals
DIMENSIONS in millimeters
Pitch
P ± 0.4
h
l
t
l
Ø d
t
w
Not Recommended for New Designs, Use F1772-2
F1772-3 300 V-X2
www.vishay.com
Vishay Roederstein
Revision: 24-Jun-13
2
Document Number: 28211
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
COMPOSITION OF CATALOG NUMBER
Notes
• For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
(1)
Taped on reel pitch 27.5 mm is not available
(2)
Same capacitance values 0.15 μF at 20 % are available in two different pitch sizes and dimensions
Note
• See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
SPECIFIC REFERENCE DATA
DESCRIPTION VALUE
Rated AC voltage (U
RAC
) 300 V
Permissible DC voltage (U
RDC
) 630 V
Tangent of loss angle 100 x 10
-4
at 1 kHz
Rated voltage pulse slope at (dU/dt)
R
435 V
DC
100 V/μs
R between leads, for C 0.33 μF at 100 V; 1 min > 15 000 M
RC between leads, C > 0.33 μF at 100 V; 1 min > 5000 s
R between leads and case; 100 V; 1 min > 30 000 M
Withstanding (DC) voltage (cut off current 10 mA)
(1)
; rise time 1000 V/s 2150 V; for 1 min
Withstanding (AC) voltage between leads and case 2500 V; for 2 s at 25 °C
Maximum application temperature 100 °C
F 1772 X XX X X X X
CAPACITANCE
(numerically)
Example:
468 = 680 nF
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
TYPE
PACKAGING (Loose)
Tolerance
Example: F17724153215 means 0.15 µF, ± 20 %; standard pitch 22.5 mm; lead length 15 mm - 1 mm;
F17724153265 means 0.15 µF, ± 20 %; reduced pitch 15.0 mm; lead length 15 mm - 1 mm
Lead length
(mm)
± 10 %
3004
3000
3015
3030
3204 4 - 1
6 - 1
15 - 1
30 + 5
3200
3215
3230
± 20 %
Standard
pitch size
and
dimension
-
3264 4 - 1
6 - 1
15 - 1
30 + 5
3260
3265
3263
Reduced
pitch size
and
dimension
(2)
PACKAGING (Taped on reel)
(1)
Tolerance
Taping height
(mm)
± 10 %
3900
3901
16.5
18.5
3290
3291
± 20 %
Standard
pitch size
and
dimension
-
16.5
18.5
3960
3961
Reduced
pitch size
and
dimension
(2)