100-267
www.vishay.com
Vishay Dale Thin Film
Revision: 14-Mar-16
1
Document Number: 60044
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Decade Divider, Single In-Line, Thin Film Divider,
Through Hole Resistor Network
Precision resistor networks comprised of series-connected
decade values are provided in single-in-line style with
edge-mounted leads on 100 mil centers. Integrated thin film
construction, laser-trimmed to extremely tight tolerances,
insures exceptionally close tracking over temperature and
throughout operating life, in either voltage division or current
monitoring mode. Voltage coefficient and noise are
extremely low. Designers gain several advantages over the
use of discrete resistor sets, including smaller size, better
overall tracking, greater reliability, and lower cost.
FEATURES
• Tight ratio tolerance (0.01 %)
• 5 decade ratio divider
• High voltage capability (300 V)
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
TYPICAL PERFORMANCE
SCHEMATIC
ABSOLUTE TRACKING
TCR 25 5
ABSOLUTE RATIO
TOL. 0.1 0.01
Available
Available
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Pin/Lead Number 6-
Resistance Range 100 to 1 M total -
TCR: Absolute ± 25 ppm/°C 0 °C to +70 °C
TCR: Tracking ± 5 ppm/°C 0 °C to +70 °C
Tolerance: Absolute ± 0.1 % +25 °C
Tolerance: Ratio ± 0.01 % to ± 0.1 % +25 °C
Power Rating: Resistor 0.100 W Maximum at +70 °C
Power Rating: Package 0.500 W Maximum at +70 °C
Stability: Absolute 1000 ppm 2000 h at +70 °C
Stability: Ratio 200 ppm 2000 h at +70 °C
Voltage Coefficient 0.1 ppm/V -
Working Voltage 300 V -
Operating Temperature Range 0 °C to +70 °C -
Storage Temperature Range -55 °C to +125 °C -
Noise - 20 dB -
Thermal EMF 0.08 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at +25 °C
1
100
100-267 Style
23456
900 9K 90K 900K
100-267
www.vishay.com
Vishay Dale Thin Film
Revision: 14-Mar-16
2
Document Number: 60044
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
Excluding the 100
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION INCHES MILLIMETERS
A 0.100 max. 2.54
B 0.620 max. 15.78
C 0.350 max. 8.89
D 0.125 min. 0.25
E 0.010 typ. 2.54
F 0.020 typ. 0.51
G 0.1 (5 x) typ. 2.54
B
C
F
D
Pin 1
Ident.
G
100-267
Date Code
Vishay
Logo
E
A
PART NUMBER 100- 267-T 267-Q 267-A 267-B
Ratio Tolerance
(1)
0.01 % 0.025 % 0.05 % 0.1 %
Voltage Rating 300 V
Noise Index < -30 dB
100
6
54321
90K9K900 900K
R1 + R2 + R3 + R4
RT
100 kΩ
1 MΩ
=
0.1=
R1 + R2 + R3
RT
10 kΩ
1 MΩ
=
0.01=
R1 + R2
RT
1 kΩ
1 MΩ
=
0.001=
R1
100 Ω
= ± 0.1 %
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome
Substrate Material Alumina
Body Conformal coated
Terminals Copper alloy
Marking Resistance to Solvents Per MIL-PRF-83401
Tin/Lead Option Sn60 - Sn63
Lead (Pb)-free Option Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF100-267TUF
SERIES MODEL
(10 or 11 digits)
TOLERANCE
(1 digit)
PACKAGING
(2 digits)
VTF100-267
(Tin lead)
VTF100S-267
(Lead (Pb)-free)
(e1)
T = 0.01 % ratio
Q = 0.025 % ratio
A = 0.05 % ratio
B = 0.1 % ratio
UF = Tubed
Historical Part Number example: 100-267Q (for reference purposes only)
100 267 Q
SERIES MODEL TOLERANCE
S-267TUF
267 TUF00 -VTF1
00VTF1