Introduction
The Keysight Technologies 8160xx Family of Tunable Laser Sources offers the full wavelength range from
1240 nm to 1650 nm with no wavelength gaps. All 8160xx Tunable Laser Sources are modules for the Keysight
8164B Lightwave Measurement System mainframe. This provides test instrumentation with maximum
exibility.
Investing in the Keysight 8160xx Family of Tunable Laser Sources can realize the cost efciency and
performance required to test components for coarse and dense wavelength division multiplexing (CWDM,
DWDM, 100GBASE-LR4) and passive optical networks (PON).
Fast Two-Way Sweeps and High Power with Low SSE
The new Keysight 81606A top-line Tunable Laser Source has been designed to reach a new accuracy level
and to increase test efciency by enabling faster swept-wavelength tests and lower cost of ownership. It
accelerates the automated adjustment of wavelength-selective devices in the new two-way sweep mode up to
200 nm/s speed with sub-picometer repeatability and best-in-class accuracy. With more than +12 dBm output
power at the product family’s lowest spontaneous emission level, it enables the validation of extremely deep
lters.
Through a major redesign, the new Keysight 81606A Tunable Laser Source reaches:
– 15 dB more dynamic range through high signal power at lowest spontaneous emission, enabled by the new
cavity and laser module design.
– A 4-fold improvement in absolute accuracy with increased real-time tracking speed and
resolution, enabled by the novel wavelength reference unit.
– Faster sweeps at up to 200 nm/s in both directions without impacting the specied dynamic accuracy,
enabled by enhanced feedback controls and drive mechanics.
The new value and basic line models share the 81606A’s new design with low spontaneous emission and
narrow line width, its industry-leading power repeatability and long-term stability. The new modules offer
additional price-performance options based on output power, tuning speed, wavelength accuracy and
repeatability. Whether you need to verify the design of demanding optical components or adjust more
wavelength-selective switches per hour, or you simply need a stable, tunable optical source, the 8160xx family
of tunable lasers offers a suitable model.
Certied quality
The 8160xx Family of Tunable Laser Sources are produced to the ISO 9001 international quality system
standard as part of Keysight’s commitment to continually increasing customer satisfaction through improved
quality control.
Specications describe the instrument’s warranted performance. They are veried at the end of a 2-meter-long
patchcord and are valid after warm-up, and for the stated output power and wavelength ranges.
Each specication is assured by thoroughly analyzing all measurement uncertainties. Supplementary
performance characteristics describe the instrument’s non-warranted typical performance.
Every instrument is delivered with a commercial certicate of calibration and a detailed test report. For further
details on specications, refer to Chapter 3 in the Keysight 8160xx Series Tunable Laser Family User’s Guide
(publication number 81606-90B01).
NEW