Umbrella Specification Rev 5.02.1, based on ZVEI Layout, EPCOS AG, Dr. G. Schulz, Dept. TQ, 08/2014 EPCOS AG 2014 • Page 1/1
MKK Film Capacitor Material Data Sheet
Product Class Film capacitors B25667xx
Date 18/09/2014
IMDS ID
if available
NA
Version 5.02.1 (08/2014)
Product Part
(IMDS: semi
component)
Material Class
(IMDS: Material)
Material
(Classification)
VDA 231
Substance
TMPS**)
[wt%]
CAS
if applicable
typical mass of
material
[wt-%]
Traces
see 1)
Active Part Thermoplastic 2A
PP
100
9003
-
07
-
0
57
Heavy metal 1C
Zn
AL
94
6
7440
-
66
-
6
7429-90-5
1.2
Heavy metal 1C
Zn
100
7440
-
66
-
6
6
Light metal 1B
Al
100
7429
-
90
-
5
1.7
Thermoplastic 2A
Polyester
Silicon
99
1
25038
-
59
-
9
7440-21-3
3.6
Encapsulation
Light metal 1B Al 100 7429-90-5 11.7
Thermoplastic 2A Polyamide 100 628-02-4 5
Operating supply 6G N2 Gas 100 7727-37-9 0.1
Termination Heavy Metal 1C Cu
Sn
94
6
7440-50-8
7440-31-5
4
Ni, Zn
Iron and Steel
1A Fe 92 7439-89-6 2
Heavy Metal 1C Zn 8 7440-66-6 0,3
Sum in total: 100
sizes [mm]
116 x 164
116 x 200
136 x 200
weight range [.kg] Part
1.1 ….. 1.6
1.7 ….. 1.8
2.1 ….. 2.5
Number
Not part of a Product Class
Contact Anant Marathe
I
mportant remarks:
1) The declaration limit is 0.1% as defined by IEC 62474 (IEC PAS 61906). Traces are
product parts, substances etc. that are below a percentage of 0.1 % by weight, if not
otherwise regulated
2) This Material Data Sheet contains typical values of the respective products set forth
herein. We expressly point out that all values and statements contained herein are
based on our best present knowledge and cannot be regarded as binding statements
or binding product specifications, unless otherwise explicitly agreed in writing. EPCOS
AG AND ITS AFFILIATES HEREBY EXPRESSLY DISCLAIM ANY
REPRESENTATION OR WARRANTY, WHETER EXPRESS, IMPLIED OR
STATUTORY, WITH REGARD TO THE STATEMENTS AND VALUES CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED TO ANY REPRESENTATION OR
WARRANTY OF MERCHANTABILITY OR SUITABILITY FOR ANY PURPOSE.
Division PFC, R&D, FILM
Address Epcos India Pvt. Ltd., Plot E 22/25, MIDC, Satpur, Nashik -
422007, INDIA
Tel: +91 253 2205 117 mailto: anant.marathe@epcos.com
*) others: .(not declarable or prohibited substances acc. GADSL)
**) typical mass percentage of substance
The products set forth herein are “RoHS
-
compatible
”
.
RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions)
of Directive 2011/65/EU of the European Parliament and of the Council of June 8
th
, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
RoHS
-
Exemptions f
or the Product Class / P
roduct according to Annex III:
(
valid not valid )
no exemptions;
Exemption 6 (a): Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0,35 % lead by weight;
Exemption 6 (b): Lead as an alloying element in aluminium containing up to 0,4 % lead by weight;
Exemption 6 (c): Copper alloy containing up to 4 % lead by weight;
Exemption 7 (a): Lead in high melting temperature type solder (i.e. lead-based alloys containing 85 % by weight or more lead);
Exemption 7 (c)-I: Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound;
Exemption 7 (c)-II: Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher;
Exemption 7 (c)-III: Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC;
Exemption 15: Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages;
Other Exemption than above ....................................................................