TST SUVEK1-1 / TST SUVEK2-1
Loop detector modules (1-channel / 2-channel)
FEATURES
Plug-in module s for TST FUS, T ST FUZ, TST FUF
and all RELCON control units
Isolation transformer between loop and detector
electronics
Automatic calibration when switching on
Connection via edge connectors and p lug-in
terminals
Adjustment possibilities via DIP switches
Unlimited holding time ad justable
Opto coupler
TECHNICAL DATA
Dimensions (W x D x H) 73 x 50 x 18 mm without plug
Power supply 24V
DC
+/-20%
Power consumption max. 2,0 W
Temperature range -20°C up to 70°C
Humidity <95%, not condensing
Loop inductivity 20-800 µH
(recommended: 75-400 µH)
Operating frequency 30-130 kHz
Sensitivity range 0,01% - 0,27% (df/f)
0,02% - 0,54% (dL/L)
Loop lead-in max. 100 m
Outputs Opto-coupler 45V / 10mA / 100mW
Rise time 50 ms /100 ms (SUVEK1/SUVEK2)
Fall time 25 ms / 50 ms (SUVEK1/SUVEK2)
Min. output time 200 ms
Connection 2x MOLEX edge connector,
Series 3215, 2x 5-pin;
1x plug clamp 4-pin, RM 3,81
FEIG ELECTRONIC reserves the right to change specification without notice at any time.
Stand of information: January 2012.
ORDER DESCRIPTIONS
TST SUVEK1-1-D
1-channel induction loop detector module for TST FUS, TST
FUZ, TST FUF and all RELCON control un its
TST SUVEK2-1-D
2-channel induction loop detector module for TST FUS, TST
FUZ, TST FUF and all RELCON control un its
FUNCTION OF LEDs
LED green LED red Function
off off no power supply
flash off Detector calibrates
on off Detector operational, loop free
on on Detector operational,
loop occupied
off flash Loop failure