WAGO Kontakttechnik GmbH & Co. KG
Subject to changes
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: +49(0)571/887-0
Fax: +49(0)571/887-844169
Email: info@wago.com
www.wago.com
20.03.19
Availability, Redundancy
Select industrial switches have several op
-
tions to build redundant network structures
and guarantee secure communication –
even when connections are faulty:
• Rapid Spanning Tree per IEEE 802.1w –
compatible with IT standards
• Jet Ring – a simple ring protocol with
switching time <300ms
• Xpress Ring – fast ring protocol with
switching time <20ms
• ERPSv2 per ITU-T standard with switching
time <50ms
In addition to communication link redundan
-
cy, a redundant power supply – which can
also be monitored using an alarm relay – is
integrated into the switches. If the power
supply fails, communication is not inter-
rupted.
Dierent Operating Modes
The unmanaged switches are ideal for di
-
rect plug-and-play use. Managed switches
are available for applications where IP lter-
ing or further interpretation of telegrams is
required for the application.
Congurable Performance
Managed switches oer performance con
-
trol features, such as:
• Storm control
• Bandwidth control
• Auto-provisioning
• Link aggregation
Bit-Based Conguration and Diagnostics
Modbus® can be used to diagnose man
-
aged switches. Conguration and diag-
nostics are also possible with standardized
protocols such as SNMP.
Modular and Expandable
Exchangeable SPF modules adapt WAGO’s
switches to various ber optic cables (FOC)
and the associated required distances and
bers.
There are SFP modules for multimode and
single-mode ber optic cables for ranges
up to 80km. With the exact combination
of copper and ber optic cables, you are
prepared for a multitude of requirements.
Web-Based Management
WAGO’s fully managed switches have
integrated Web-based management. Any
Web browser can be used to congure the
switch.
Integrated Function Monitoring
For monitoring and error reporting, the
managed switch has congurable func
-
tions such as e-mail alarm and SNMP traps.
In addition, all switches (except for Eco
versions) can monitor individual ports or
the power supply via potential-free alarm
contact. A DIP switch is used to congure
this function.
Full Bandwidth on All Ports
The switches’ internal bandwidth is de
-
signed so that all ports can communicate
simultaneously – in full duplex without
restrictions.
Security
Managed switches have built-in security
features, such as:
• Authentication
• Access control lists
• DHCP snooping
• Port security
Data Transmission
Managed switches provide conguration
options for data transfer, such as:
• VLAN
• IGMP snooping
• IP-based VLAN
• MAC-based VLAN
General Product Information
Advantages:
• Adaptable to dierent transmission media
• Automatically adapts to
- Speed (auto-negotiation)
- Wiring (auto-crossover, MDI/MDIX)
• Optional redundancy
• Wide supply voltage range
Always the Right Solution
WAGO’s range of switches ensures the
scalability of your ETHERNET network in
-
frastructure, while providing outstanding
electrical and mechanical characteris-
tics. These robust switches are designed
for industrial use and are fully compliant
with IEEE 802.3, IEEE 802.3u and IEEE
802.3ab.
Combinable with Fiber Optic Cables
ETHERNET via ber optic cables oers
a multitude of advantages for industrial
applications.
High immunity to interference, electrical
isolation and long ranges up to 80 km
are extremely benecial characteristics
– and these benets are a perfect t with
IT.
Scaled Oering
Unmanaged and managed switches in
various designs are available for high-
end applications. Our Eco Switches are
ideal for cost-sensitive applications that
do not require technical features such as
redundancy. They are ideal for small- to
medium-sized networks.
Industrial Switches
A
1)
b)
a)
C
F
2)
B
D
1)
b)
a)
2)
1)
2)
E
1)
2)
c)
1)
2)
Power supply (1)
Technologically related dierences on the
connection level (2)
Housing Design (A)
• DIP switch for conguration (a)
• Diagnostic LEDs (b)
• W x H* x D (mm) 50 x 120 x 105
Housing Design (B)
• DIP switch for conguration (a)
• Diagnostic LEDs (b)
• W x H* x D (mm) 50 x 120 x 162
Housing Design Eco (C)
• W x H* x D (mm) 23.4 x 73.8 x 109.2 or
46 x 99.6 x 116
• DIN-35 rail
• wall-mount (852-111, 852-1111)
Housing Design Eco (D)
• W x H* x D (mm) 109.2 x 23.4 x 73.8
• DIN-35 rail or wall-mount
Housing Design PoE+ (E)
• Power over Ethernet (PoE+) Ports (c)
• W x H* x D (mm) 50 x 120 x 160
Housing Design (F)
• SFP module for connecting ber optic
cables
• LC connector
• W x H x D (mm) 13.4 x 13.3 x 56.6
*Height from upper edge of DIN-rail
Interfaces and Types
Industrial Switches
Extended Temperature Range
Industrial automation technology is typically
operated in temperatures ranging from 0°C
to55°C. However, there are applications
that require an extended temperature range.
Nearly all switches and SFP modules are
available for an extended temperature range
of −40°C to +70°C.
Variants