Certificate of RoHS Compliance

July 15, 2020

Silicon Labs certifies that the device listed below is compliant with the European Union Directive (EU)

2015/863 for the Restriction of the use of certain Hazardous Substances in Electrical and Electronic

Equipment (RoHS3) and China’s Administrative Measure on the Control of Pollution Caused by Electronic

Information Products (China RoHS).

EFR32BG22C112F352GM32-C

No Cadmium (Cd), Mercury (Hg), Hexavalent Chromium (Cr+6), PBB, PBDE, DEHP, BBP, DBP, or DIBP

is intentionally added to this device, any Lead (Pb) that may be used is below the allowable limit or

covered under current RoHS exemptions*. Any trace impurities of these substances contained in the part

are below the RoHS specified threshold levels:

Cr+6, Hg, Pb, PBB’s, PBDE’s, DEHP, BBP, DBP, DIBP < 1000ppm

Cd < 100ppm

All information provided in this Certificate of Compliance is accurate, to the best of our knowledge, as of

the date this certification was issued. For additional inquiries, please visit our Environmental

Responsibility page or contact your local Silicon Labs sales representative.

*Passive components used in some products may use RoHS exemption 7(c)-I Electrical and electronic components

containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a

glass or ceramic matrix compound.

Sandeep P. Kumar

Senior Vice President of Worldwide Operations

400 W. Cesar Chavez St.

Austin, Texas 78701

Phone (512) 416-8500

Fax (512) 416-9669