●
High current up to 23 amperes can be applied
● Secure housing lance for easy inserting
contacts into housing
● Lineup of retainers that improve mechanical
reliability
● Contact and housing are common with wire-
to-wire connection.
This VL connector is 6.2 mm pitch wire-to-
board connector. The connector suitable for
the high current has been realized by using
highly-conducting material.
1
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
6.2 mm pitch/Disconnectable Crimp style connectors
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
<4 circuits>
Specifications
• Current rating: 23 A AC/DC (2 circuits/ AWG #12)
The following table shows the rated current when applying current for all
circuits in each combination of the number of circuits and the wire to be used.
Current unit: A
No. of
circuits
Wire size (AWG)
#12
23
22
21
#14
18
17
16
#16
15
14
13
#18
11
10
9
#20
9
8
8
2
3
4
PC board layout and Assembly layout
<2, 3, 4 (Single-row) circuits>
Note: 1. Tolerance for the drilling hole pitch on PCB is ± 0.05 throughout, and shall not be cumulative over than ± 0.1.
2. Hole dimensions differ according to the type of PC board and piercing method.
The dimensions described in the above figure should be given as reference. Contact JST for details.
®
®
® ®
®
Note 1. Applicable range of rated current:
The rated current mentioned above is applied only in the combination of
contact and header for high current specified in this catalogue.
When either is a normal type product, please be careful because the rated
current of the normal type product is applied.
Note 2. Notes on parallel branching current:
Do not branch to the multiple circuits in parallel current which is exceeds
the rated current, as it may cause problems such as imbalance when
applying current.
If it is unavoidable that branch in parallel is necessary, design the circuits
while suppressing the unbalanced current and proving the sufficient margin
to the rated current.
• Voltage rating: 600 V AC/DC
• Temperature range: -25℃ to +90℃
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 7 mΩ max.
After environmental tests/ 10 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 2,000 VAC/minute
• Applicable wire: AWG #20 to #12
• Applicable PC board thickness: 1.6 m
m
*
In using the products, refer to "Handling Precautions for Terminals
and Connectors" described on our website (Technical documents
of Product information page).
* RoHS2 compliance
* Dimensional unit: mm
* Contact JST for details.
Standards
Recognized E60389
Certified LR20812
R9351103
(15.6)
(29.2)
(21.7)
(29.2)
φ2.1
±0.05
A
±0.1
6.2
±0.05
3.6 min.
6.84 min.
φ2.1
±0.05
6.2
±0.05
3.6 min.
3.4 min.
8.28
±0.05
Locking side
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
6.2 mm pitch/Disconnectable Crimp style connectors
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
6.2 mm pitch/Disconnectable Crimp style connectors
VL CONNECTOR
(HIGH CURRENT TYPE)
VL CONNECTOR
(HIGH CURRENT TYPE)
Material and Finish
Model No.
Applicable wire
Q'ty/
reel
mm
2
AWG #
Insulation O.D.
(mm)
Phosphor bronze, tin-plated (reflow treatment)
SVSF-61T-P2.0
SVSF-81T-P2.0
0.5～2.0
3.5
20～14
12
1.9～3.4
4.1
2,000
2,000
Contact
RoHS2 compliance
Material and Finish
PA 66, UL94V-0, natural (white)
2
3
4
4 (Single-row)
VLP-02V-1
VLP-03V-1
VLP-04V-1
VLP-04VN-1
500
500
500
500
No. of circuits
Model No.
Q'ty/bag
Housing
<2 circuits>
<3 circuits>
<4 circuits>
<4 circuits (Single-row) >
RoHS2 compliance
2
Note: Contact JST for fully automatic crimping applicator.
MK/SVF/M-61-20
MK/SVF/M-81-20
SVSF-61T-S2.0
SVSF-81T-S2.0
MKS-L
Contact
Crimping
machine
Crimp applicator with dies
Crimp applicator
Dies
APLMK SVF/M61-20
APLMK SVF/M81-20
Applicator
AP-K2N
3.1
16.7
3.6 2 1.7
4.1
2
1
3
L JST
8.45.2
6.2
19.6
1113
6.2
15
1113
1
2
L JST
8.4
5.2
5.2
6.2
15
15.41113
4
3
1
2
L JST
8.45.2
6.2
2 3 4
1
L JST
1113
25.8