AiT Semiconductor Inc.
www.ait-ic.com
A4004
BATTERY MANAGEMENT
ONE CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC
REV1.1 - SEP 2018 RELEASED, JUN 2020 UPDATED - - 1 -
DESCRIPTION
FEATURES
The A4004 series product is a high integration
solution for lithium-ion/polymer battery protection.
A4004 contains advanced power MOSFET,
high-accuracy voltage detection circuits and delay
circuits. A4004 is put into a small package and only
one external component makes it an ideal solution
in limited space of battery pack. A4004 has all the
protection functions required in the battery
application including overcharging,
over-discharging, overcurrent and load short
circuiting protection etc. The accurate safe and full
utilization charging. The low standby current drains
little current from the cell while in storage. The
device is only targeted for digital cellular phones,
but also for any other Li-ion and Li-Poly
battery-powered information appliance requiring
long-term battery life.
The A4004 is available in DFN6(2x3) package.
ORDERING INFORMATION
Package Type
Part Number
DFN6(2x3)
SPQ: 4,000pcs/Reel
J6
A4004J6R
A4004J6VR
Note
V: Halogen free Package
R: Tape & Reel
AiT provides all RoHS products
Protection of Charger Reverse Connection
Protection of Battery Cell Reverse Connection
Integrate MOSFET
Over-temperature Protection
Two-step Overcurrent Detection:
Over-discharge Current
Load Short Circuiting
Charger Detection Function
0V Battery Charging Function
High-accuracy Voltage Detection
Low Current Consumption
Operation Mode: 2.5uA typ
Power-down Mode: 0.1uA typ
Available in DFN6(2x3) package
APPLICATION
One-Cell Lithium-ion Battery Pack
Lithium-Polymer Battery Pack
TYPICAL APPLICATION
