1
Transmitter
BiT – Barksdale Intelligent Transmitter Series H455, 455, 452
Features
Lightweight, compact and all-welded rugged stainless steel construction
High performance sensors for high accuracy
Optional HART® communication protocol with diagnostics & field
calibration, reducing maintenance time and cost; and 10:1 turndown ratio
for re-ranging, maintaining high accuracy and allowing one part number for
multiple pressure ranges
High accuracy: ±0.1% and ±0.25% FSO, (L,H,R)
cULus Certification for Ordinary Locations
IP66 & IP67 and NEMA 4X Protection
CE, CRN, NACE compliant and Superior EMC/EMI protection
RoHS / REACH Compliant
General Specifications*
Accuracy
including Linearity,
Hysteresis and
Repeatability:
at 75°F, Typical
±0.1% of Calibrated FSO (Option [–A1])
±0.25% of Calibrated FSO (Standard)
±0.5% of Calibrated FSO (Vacuum only
[-23])
Temperature Shift:
Zero & Span: 0.0125% Per °F over the
compensated temperature range
Long Term
Stability:
±0.2% FSO /year of calibration curve
Typical Life Cycle:
100 million cycles
Proof Pressure:
2X range for up to 7500 psi models
1.5X range for 7500 - 30000 psi models
Input:
H455:
455*:
452*:
Excitation voltage: 9 to 30 VDC
Excitation voltage: 9 to 30 VDC
Excitation voltage: 12 to 30 VDC
* (SELV, PELV), Class II Power Supply
Supply Current:
H455 & 455:
452:
20mA max.
20mA max.
Output:
H455:
455:
452:
Output: 4–20 mA with HART® Protocol
Full Scale Output: 20 mA ±1%
Zero output: 4 mA ±1%
Output: 4–20 mA
Full Scale Output: 20 mA ±1%
Zero output: 4 mA ± 1%
Output: 1–5 VDC
Full scale output: 5.0 VDC ±1%
Zero output: 1.0 VDC ± 1%
Dynamic
Response Time:
H455:
455 & 452:
<70 milliseconds
<50 milliseconds
Enclosure:
All welded 300 series stainless steel. IP66 & IP67
and NEMA 4X rated. 316 Stainless steel (optional)
Wetted Parts:
Sensor:
Fitting:
17-4 PH Stainless steel (more than 10k psi)
316L Stainless steel (up to 10k psi)
Inconel (optional: up to 10k psi)
17-4 PH Stainless Steel for -UL option (10k psi)
17-4 PH Stainless steel (all ranges)
316L Stainless steel and 718 Inconel (optional: up to
10k psi)
Media
General:
Corrosive and Acidic:
(up to 10,000 psi)
Gas, vapor, liquid and viscous fluids [-Z17]
718 Inconel wetted material, NACE [-NC]; and 316L
Stainless Steel, NACE [-SS]
Pressure Connection:
13 available options. Refer to product configurator
for available connections and ranges.
Electrical Connection:
3 conductors for voltage output series and 2
conductors for current output series, 18 AWG, 80”
(2 m) long with integral strain relief and case ground
(standard). Jacketed cable (optional). Halogen free
wires and cable.
Temperature Ranges:
Operating (Ambient):
Compensated:
Media:
Storage:
-40 to +176 °F (-40 to +80 °C)
0 to +165 °F (-18 to +74 °C)
-40 to +176 °F (-40 to +80 °C)
-40 to +185 °F (-40 to +85 °C)
Vibration:
10 g’s, 10-500 Hz, MIL-STD 202, Method 204, Cond. A
Shock:
50 g’s, 11 mS, MIL-STD 202 Method 213, Cond. G.
* See product configurator for additional options.
Applications
Hydraulic and Pneumatic Product Testing
Engine Testing
Hydraulic Equipment
O&G BOP Pressure Testing
Acid Pumps
Data Acquisition System
Heavy Mobile Equipment Testing
OEM Factory Acceptance Testing
Pressure Data Loggers
Mobile Pressure Test Labs
Subject to technical changes.
2
BiT – Barksdale Intelligent Transmitter Series H455, 455, 452
Approvals:
cULus:
cULus approved for ordinary locations
(UL 61010-1)
HART® Protocol:
Turndown Ratio:
Analog Output
Calibration:
Sensor Trim:
Diagnostics:
HART® 7.6
10:1 (Full scale output rangeability)
Adjustable zero and span of 4-20mA.
Full scale range must be ≥ (calibrated
span / 10)
Sensor zero and full scale trim
Transmitter failure indicated by off-scale
analog signals to alarm the user
See HART Installation and Operation
Manual 272438 for detailed information
Compliances:
CE, CRN (refer to drawing # 272479 for
applicable models)
NACE (316L SS or 718 Inconel wetted
material)
Electromagnetic
Compatibility (EMC)
IEC/EN 55011:
IEC/EN 61000-4-2:
IEC/EN 61000-4-3:
IEC/EN 61000-4-4:
H455:
455 & 452:
IEC/EN 61000-4-5:
H455:
455 & 452:
IEC/EN 61000-4-6:
Emission & radiated emission for class A
limits
Electrostatic discharge (ESD) test - contact
discharge +/-4 kV, Air discharge +/-8 kV
Radiated RF, EM field immunity
80mhz-1ghz, 3v/M
EFT (Burst) Test, +/-2 kV
EFT (Burst) Test, +/-1 kV
Surge Test, +/-1kV between line and earth
ground
Surge test not applicable; Class II power
supply used at input of the device
RF Immunity, 150 kHz – 80 MHz, 3V
Weight:
16 Ounces (453 grams)
Warranty:
1 Year warranty
Subject to technical changes.
* See product configurator for additional options.
General Specifications* cont.
Wiring Code
CONFIGURATION WITH HART
TABLE 1. FREE LEAD WIRES AND CONNECTOR PIN CONNECTIONS
MODEL NO. RED/A/1 BLACK/B/2 GREEN/D/4 WHITE/C/3
H455 + EXCITATION - EXCITATION EARTH GROUND NOT INCLUDED
455 + EXCITATION - EXCITATION EARTH GROUND NOT INCLUDED
452 + EXCITATION - EXCITATION EARTH GROUND VOLTAGE OUTPUT
TABLE 2. JACKETED CABLE WIRE CONNECTIONS (-J Option)
MODEL NO. WHITE BROWN GREEN YELLOW
H455 + EXCITATION - EXCITATION EARTH GROUND NOT INCLUDED
455 + EXCITATION - EXCITATION EARTH GROUND NOT INCLUDED
452 + EXCITATION - EXCITATION EARTH GROUND VOLTAGE OUTPUT
Point to Point
Multi Drop
+
_
+
_
METER
BLK(-EXC)
RED(-EXC)
POWER SUPPLY
9 - 30 VDC
CASE
GROUND
455
TRANSDUCER
CURRENT OUTPUT
WIRING
A
V
WHT (+ OUT)
VOLTAGE OUTPUT
452
TRANSDUCER
CASE
GROUND
POWER SUPPLY
11/14-30 VDC
RED(+ EXC)
BLK
(COMMON)
_
+
_
+
+
_
+
_
METER
BLK (-EXC)
RED(+ EXC)
POWER
SUPPLY
425
TRANSDUCER
CURRENT OUTPUT
A
LOOP RESISTANCE
REQUIRED (OHMS)
EXCITATION VOLTAGE (volts DC)
OPERATING
BAND
MAXIMUM
RESISTANCE
363025201512
0
300
600
900
1200
R
≥
250
Ω
Black
Red
-
+
HART Master /
Handheld Communicator
H455
Point to Point :
POWER SUPPLY
Red
Black
Red
Black
H455
#15
H455
#2
Black
Red
H455
#1
Multi Drop :
HART
MASTER
R
≥
250
Ω
Min 250R
@ 20mA
1500
9
+ +
+
+
-
-
-
-
CASE
GROUND
Green
GRN GRN
Green
Input Card/ Module
Field Operation:
H455
+
-
Red
Black
+
_
+
_
METER
BLK(-EXC)
RED(-EXC)
POWER SUPPLY
9 - 30 VDC
CASE
GROUND
455
TRANSDUCER
CURRENT OUTPUT
WIRING
A
V
WHT (+ OUT)
VOLTAGE OUTPUT
452
TRANSDUCER
CASE
GROUND
POWER SUPPLY
11/14-30 VDC
RED(+ EXC)
BLK
(COMMON)
_
+
_
+
+
_
+
_
METER
BLK (-EXC)
RED(+ EXC)
POWER
SUPPLY
425
TRANSDUCER
CURRENT OUTPUT
A
LOOP RESISTANCE
REQUIRED (OHMS)
EXCITATION VOLTAGE (volts DC)
OPERATING
BAND
MAXIMUM
RESISTANCE
363025201512
0
300
600
900
1200
R
≥
250
Ω
Black
Red
-
+
HART Master /
Handheld Communicator
H455
Point to Point :
POWER SUPPLY
Red
Black
Red
Black
H455
#15
H455
#2
Black
Red
H455
#1
Multi Drop :
HART
MASTER
R
≥
250
Ω
Min 250R
@ 20mA
1500
9
+ +
+
+
-
-
-
-
CASE
GROUND
Green
GRN GRN
Green
Input Card/ Module
Field Operation:
H455
+
-
Red
Black
TABLE 3. DEUTSCH CONNECTOR PIN CONNECTIONS (-D3 & -D4 Option)
MODEL NO. CONNECTOR PIN A/1 PIN B/2 PIN C/3 PIN D/4
CURRENT D3 + EXCITATION - EXCITATION EARTH GROUND N/A
VOLTAGE D3 + EXCITATION - EXCITATION VOLTAGE OUTPUT N/A
CURRENT D4 - EXCITATION + EXCITATION EARTH GROUND N/A
VOLTAGE D4 - EXCITATION + EXCITATION VOLTAGE OUTPUT EARTH GROUND
4 53/64"
122.7
5 21/64"
135.4
.40
10.2
1/4"
6.4
FACTORY SEALED HALOGEN FREE
18 AWG LEADS 80 INCHES (2 METERS)
REFER TABLE 1 & 2.
OPTIONAL:
JACKETED CABLE
(LEADS/CABLE: BLANK, -T6, -H3)
ELECTRICAL CONNECTIONS:
STD(BLANK):
1/2"-14 NPT MALE
CONDUIT THREADS
OPTIONAL:
T2:
BENDIX 6P, SS HERMETIC
T3
: BENDIX, 6P, ALUM. FLANGE
T4:
M12 (4 Pin) CONNECTOR
T5:
STD DIN (43650)
T6:
M20X1.5 THD
T7:
M8 (4 Pin) CONNECTOR
T8:
4 PIN BENDIX, SS HERMETIC
H3:
WATERTIGHT GLAND WITH
18 AWG FREE LEADS
H4:
SUBMINATURE DIN (43650)
.03 OR Ø3/16
PRESSURE PORT OPENING
A/F
1" or 1 1/8"
[25.4] or [28.6]
1/4 NPT FEMALE THD
(-P6 SHOWN)
REFER CONFIGURATION
TABLE ON SHEET 2 FOR OPTIONAL
PROCESS CONNECTIONS.
1 3/8"
35
5"
127.7
.59
15
14
-T2 TERMINATION:
BENDIX CONNECTOR
MS3113 TYPE ,
6 PIN, SS HERMETIC
STD, -T6 MODEL
A
B
C
D
E
F
'A' TO 'F' ARE PINS
FOR CONNECTION
REFER TABLE 1.
-T2 MODEL
Copyright © 2017-19, Barksdale Inc., All Rights Reserved
18
STANDARD MODIFICATIONS: ADD IDENTIFIER TO P/N
(EXAMPLE: H455-01-W180 = STANDARD 0-15 PSI HART MODEL WITH 180 INCH LONG WIRES).
17. TYPE 4X ENCLOSURE ENVIROMENTAL RATING IP66 & IP67.
16
ALL PRESSURE RANGES HAVE BUILT-IN PRESSURE SURGE PROTECTOR (SNUBBER).
ADD "-Z17" SUFFIX FOR HIGH PRESSURE MODELS WITH NO SNUBBER.
15
PART NUMBERS: ARE RATED IN PSIS. FOR RATING IN PSIA INSERT "-A" FOLLOWING
THE PRESSURE RATING. (EXAMPLE: H455-04-A IS RATED IN PSIA, H455-04 IS RATED IN PSIS)
14
BENDIX CONNECTOR (-T2) OPTION.
PIN D, E, F ARE RESERVED FOR SPECIAL MODELS ONLY.
13. MATERIAL OF CONSTRUCTION:
HOUSING, ELECTRICAL CONNECTION:
304 STAINLESS STEEL, OPTIONAL: 316 STAINLESS STEEL
.
12. WETTED MATERIAL:
SENSOR:
STANDARD: THIN-FILM SENSOR, 17-4 PH STAINLESS STEEL
(15k-30k PSI AND 10k PSI WITH -UL OPTION) MODELS
STANDARD: DIFFUSED SILICON SENSOR, 316L STAINLESS STEEL (UP TO 10k PSI) MODELS
OPTIONAL: THIN-FILM SENSOR, 718 INCONEL (UP TO 10k PSI) MODELS
FITTING (PROCESS CONNECTION):
STANDARD: 17-4 PH STAINLESS STEEL (15k-30k PSI)
OPTIONAL: 316L STAINLESS STEEL (UP TO 10k PSI)
OPTIONAL: 718 INCONEL (UP TO 10k PSI)
11. THERMAL, ZERO AND SPAN EFFECT:
0.0125% PER
F OVER THE COMPENSATED TEMPERATURE RANGE.
10. SPAN ACCURACY:
1% FSO AT 75
F (24
C).
9. SPAN ADJUSTMENT (TURN DOWN): 10:1 (WITH HART OPTION)
8. ZERO BALANCE:
1% FSO AT 75
F (24
C).
7. RESPONSE TIME: 70ms
6. COMPENSATED TEMPERATURE RANGE: 0 to +165
F (-18 to +74
C)
STORAGE TEMPERATURE RANGE: -40 to +185°F (-40 to +85°C)
MEDIA TEMPERATURE RANGE: -40 to +176°F (-40 to +80°C)
OPERATING (AMBIENT) TEMPERATURE: -40 to +176
F (-40 to +80°C)
5. ACCURACY (LINEARITY, HYSTERESIS, REPEATABILITY):
0.25% FSO AT 75
F.
±0.10% FSO AT 75
F (OPTIONAL).
±.5% FOR VACUUM ONLY [-23] TYP.
4
DIGITAL AMPLIFIER (CURRENT/VOLTAGE OUTPUT):
H455, H455E: 4 - 20 mA (WITH HART OPTION)
455, 455E: 4 - 20 mA
452: 1 - 5 VDC
3
EXCITATION VOLTAGE:
H455, H455E: 9 TO 30 VDC (WITH HART OPTION)
455E: 9 TO 30 VDC
455: 9 TO 30 VDC (CLASS II POWER SUPPLY)
452: 12 TO 30 VDC (CLASS II POWER SUPPLY)
2
PROOF PRESSURE: 2X RANGE FOR UP TO 7500 PSI MODELS;
1.5X RANGE FOR 7500 - 30000 PSI MODELS.
1
PRESSURE RANGE: REFER PRODUCT CONFIGURATOR ON PAGE 2.
NOTES: UNLESS OTHERWISE SPECIFIED
29
22
REV.
DATE
SCALE
WEIGHT
NEXT ASSEMBLY
DWG.
REV.
#
C
DIST.
GmbH
REFERENCE DPM
PCO
1
2
3
4
A
B
C
D
4
3
2
1
D
C
A
B
1:1
SHEET 1
OF 3
-
G
Los Angeles, CA 90058-0843
Ph: 323-589-6181 Fax: 323-583-6252
DRAWN DATE
PAVAN
01-23-2018
CHECKED DATE
APPROVED DATE
UNLESS OTHERWISE
SPECIFIED
DIMENSIONAL TOLERANCES
FRACTIONAL ±1/16
DECIMAL ±.010
ANGULAR ± 5°
DIMENSIONS IN BRACKETS
ARE IN MILLIMETERS
www.barksdale.com
450
BARKSDALE INTELLIGENT TRANSMITTER
WITH OPTIONAL HART COMM PROTOCOL
A.4
03-19-2018
02-23-2018
X04
X01
01-23-2018
XX-XX-2017
YONG K
982217, 982218,
982219, 982220,
982434, 982435
DPM-4202.034
-----------------------
X02
01-24-2018
X03
02-05-2018
02-28-2018
A.1
03-05-2018
A.2
A.3
03-09-2018
03-27-2018
A.5
04-02-2018
A.6
04-16-2018
A.7
A.8
04-23-2018
A.9
05-08-2018
05-11-2018
A.10
A.11
07-17-2018
A
07-24-2018
00010982
09-11-2018
B
00011075
00011144
C
10-25-2018
12-05-2018
00011183
D
00011257
02-21-2019
E
00011tbd
G
09-16-2019