TAKACHI ELECTRONICS ENCLOSURE CO., LTD.
3-21-16 Higashi-ryoke, Kawaguchi-shi, Saitama, 332-0003 JAPAN
Tel. +81-48-222-5409 / Fax. +81-48-222-7652
■ G color type (White gray - RAL7035) of WP Enclosure and WPMB Pole mount bracket
shall be changed into our original brighter color (Munsell N8.75 nearly match) .
■ This change would be carried out as soon as present stock has run out.
WP10-10-4G has already been changed in new brighter color.
■
Price and the material also stay in the same manner.
■ Ask for samples of new brighter color version if necessary.
■ No both color mixed for one order batch.
No product code has been changed. "G" color code is going on for new brighter color.
Current (Old) Color
Currnet Colo
r
New Colo
r
Munsell N8.75
(Nearly match)
(Original Color)
New Color
RAL7035
April 2nd, 2018
Color Chan
g
e Notice
G color t
yp
e of WP and WPMB series
WP enclosure
WPMB
●
IEC60529 standard is a system for classifying the degrees of protection provided by the enclosures of electrical
equipment, such as against dust and water.
IP6x : No ingress of dust; complete protection against contact (dust tight).
IPx7 : No ingress of water when submerged up to a depth of 1 meter for 30
minutes
IP67
is
Highly elastic and durable silicone gasket allows for high waterproof
ability.
The use of insert nuts allows the unit to retain its waterproofi ng ability
even after multiple opening and closing.
Waterproofi ng ability by using silicone gasket
The white gray "G" type utilizes a UV resistant, durable ASA material.
Recommended for outdoors usage as a communication device type
equipment.
Weather-resistant ASA material
IP67 Weatherability
Waterproof Plastic Enclosure
Easy mounting onto walls and brackets by opening the blind lids.
A clean and sleek appearance can be maintained as screws are
hidden away by the blind lids.
Easy installation on walls and brackets
By using a pole mount bracket accessory, it can be attached to poles
with ease.
Easy installation on electrical poles
WP series are used in products such as communication devices, controllers, measurement
instruments, and so on.
Please utilize a waterproof membrane keypad or membrane switch.
Note that the waterproof performance will be lost by drilling/milling holes or cutouts for buttons or switches on waterproof enclosures.
How to make waterproof buttons and switches
Please utilize a cable gland from our available range of cable gland accessories.
Refer to page 308 ~ 314 for more information.
How to make waterproof cable hole
IP67 UV-PROTECT
NETWORK PLASTIC BOX
WP SERIES
APPLICATION EXAMPLE
65
66
タカチ総合2016-英語版_ノーマル.indd 9-10 2016/10/17 9:55