Oiles Lutech S
Oil-impregnated polyacetal bearings with fillers
Feature
Serviceable without the need of lubrication and demonstrates superior
friction characteristics under light-load and high-speed conditions.
Features low coecient of friction and superior speed characteristics.
Prevents stick slips and squeak noises.
Injection-molded and can be made in complicated shapes. Has good mass
productivity.
Service range
Lubrication condition
Service temperature range
℃
Allowable max. pressure
P
N/mm
2
{
kgf/cm
2
}
Allowable max. velocity
V
m/s
{
m/min
}
Allowable max.
PV
value
N/mm
2
・
m/s
{
kgf/cm
2
・
m/min
}
Dry
−40∼+80
5.0{51}
1.65{99}
2.45{1,500}
Specific gravity
Tensile strength
Tensile elongation at break
Flexural property
Flexural modulus
Hardness
Izod impact strength (with notch)
Co-efficient of linear expansion
Melting point
UL incombustibility
ASTM D 792
ASTM D 638
ASTM D 638
ASTM D 790
ASTM D 790
ASTM D 785
ASTM D 256
ASTM D 696
DSC
UL94
1.36
44.1{450}
30
60.8{620}
2,110{21,500}
15.7{160}
74.0{755}
75
39.2{4.00}
8∼13
165
HB
Mechanical properties
Compressive stress
1% deformation
10% deformation
ASTM D 695
※
The values shown above are typical values, not the standard values.
̶
N/mm
2
{kgf/cm
2
}
%
N/mm
2
{kgf/cm
2
}
N/mm
2
{kgf/cm
2
}
N/mm
2
{kgf/cm
2
}
HRM
J/m{kgfcm/cm}
×10
−5
℃
−1
℃
File No.E78113
83
Test data
W
Journal rotation test
<Testing conditions>
Mating material : stainless steel
(surface roughness Rz0.8μm)
Pressure : 0.098N/mm
2
{1.0kgf/cm
2
}
Velocity : 0.783m/s{47.0m/min}
Rotation : 3,000rpm
Test time : 500hrs.
Mode of operation : reversing rotational
��� direction every
minute
Lubrication : dry
Coefficient of friction〔μ〕
0.5
0.4
0.3
0.2
0.1
0
0 100 200 300
Oiles Lutec S
Conventional POM bearing
400 500
Test time〔hrs.〕
84