Oiles Bearings
Oiles Bearings
Nearly every piece of mechanical equipment utilizes
bearings. Bearings are the consumable product acting as
a motion control interface between moving components.
Bearings can be classified in two categories: Plain and
roller. Normal plain bearings are subject to seizure, which
is caused by large loads, improper operation, foreign
matter, adverse temperature conditions, and improper
lubrication or maintenance. In such severe conditions
where normal plain bearings are not functional, Oiles
bearings demonstrate high wear resistance, seizure
resistance, and other performance required for bearings;
in addition, Oiles guarantees performance improvements
of mechanisms and offers maintenance-free operations.
9
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Technical
Information
Slide Shifter
Corporate Pro le
Types of Bearings
Characteristics
Oiles Bearings Normal Plain Bearings Roller Bearings
Self-lubricating
Applicable to lubrication-
free operations.
Requires lubrication.
Requires lubrication
normally.
Impact resistance
Superior Slightly better Inferior
Heat resistance
Applicable to high
temperature.
Slightly better (Up to
+150˚C normally)
Inferior (Not applicable to
high temperature.)
Reciprocating motion
Superior A little inferior A little inferior
Oscillating motion
Superior Slightly better A little inferior
Corrosion resistance
Superior A little inferior Inferior
Size Compact and thin Compact and thin Large and thick
Bearings
Roller Bearings
Normal Plain
Bearings
Plain Bearings
Oiles Bearings
009-014_選定の目安.indd 9 19/09/19 9:51
Oiles bearings feature self-lubricating functions and demonstrate high performance, which normal plain
bearings cannot provide, for uid lubrication, boundary lubrication, and dry friction elds.
10
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Technical
Information
Slide Shifter
Corporate Pro le
Roller Bearings
Roller bearings consist of ball or roller shaped
rolling elements and casings and reduce friction by
the principle of rollers.
Major types
■
Ball bearings
■
Roller bearings
■
Needle bearings
Normal Plain Bearings
Normal plain bearings are made of a copper alloy,
which requires lubrication. They are used in fluid
lubrication and boundary lubrication fields.
Major types
■
Plastic bearings
■
Metallic bearings
Oiles Bearings
(Self-Lubricating Bearings)
009-014_選定の目安.indd 10 19/09/19 9:51
Plastic Bearings
Multi-layer Bearings
Metallic Bearings
Slide Shifters
Air Bearings
11
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Technical
Information
Slide Shifter
Corporate Pro le
Oiles Bearings
Oiles Bearings: Oiles bearings are plain bearings capable of
reducing, and in most cases, eliminating the need for periodic
lubrication. Oiles bearings routinely outperform normal plain
bearing products in demanding applications when the correct
product is selected and integrated properly in the application.
Advantages
No requirement of a lubricating system,
lubrication holes, or oil grooves
Remarkable cost reduction by cost and labor associated with
lubrication, machining and assembly.
Reduction of running costs
Reduces lubricating oil consumption and equipment maintenance
costs and enables a remarkable reduction in operating costs.
Maintenance free
Significantly reduces costs for lubrication and maintenance of
lubricating system and eliminates problems caused by improper
lubrication.
Reduction of design time
No need for lubrication simplies designs and structures and
remarkably reduces costs and time. With superior durability, Oiles
bearings improve machine performance and prolong service life.
Lubricating oil recycling and environmental
protection
Reduces expenses and labor needed to recycle oil and protects the
environment against contamination from oil.
Oiles Bearings
009-014_選定の目安.indd 11 19/09/19 9:51
12
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Technical
Information
Slide Shifter
Corporate Pro le
Thermoplastic
Thermosetting plastic
Plastic
Multi-layered
Fiber-reinforced
Composite
Multi-layered
Composite
Embedded
Dispersed
Multi-layer
Solid lubricants
Additive containing
Metallic
Air Bearings
Slide Shifters,
Guide units
Types of Oiles Bearings
Oil impregnated
80
････････････････
Oil-impregnated polyacetal bearings P.67
Pillow 80
･･････････
Unit bearings P.78
PS Bearings
･･･････
Plastic sliding bearing units P.81
Lutech S
･･････････
Oil-impregnated polyacetal bearings with llers P.83
Lutech E
･･････････
Conductive polyacetal bearings with llers P.85
Lutech AT
･････････
Oil-impregnated polyacetal bearings with llers P.44
Lutech GP
････････
Polyacetal bearings with llers P.89
480
･･･････････････
Oil-impregnated polyacetal bearings reinforced with carbon bers
P.91
81
････････････････
Oil-impregnated polyole n bearings P.93
83
････････････････
Polyamide bearing with llers P.95
88
････････････････
Oil-impregnated polyester bearings P.97
88 Elastomer
･･････
Polyester elastomer P.98
88-03
･････････････
PBT bearings with llers P.99
Glitron F
･･････････
PTFE bearings with lllers P.101
Glitron S
･･････････
Polyphenylene sul de bearings with llers P.107
Glitron SE
･････････
Polyphenylene sul de bearings with llers P.107
50
････････････････
Polyurethane bearings P.115
Aramid M/F1
･･････
Aromatic polyamide bearings P.117
250
･･･････････････
Phenolic bearings P.123
425
･･･････････････
Phenolic bearings for underwater applications P.125
Fiber on GH
･･････
Polyester bearings with llers P.129
Fiber on FW
･･････
Multi-layer PTFE bearings P.131
Fiber on TR
･･･････
Multi-layer PTFE bearings P.133
Fiber on OH
･･････
Multi-layer PTFE bearings P.134
470-02/02W
･･････
Carbon ber composite bearings P.135
Drymet ST
････････
Oil-impregnated polyacetal multi-layer bearings with back metals
P.141
Drymet LF
････････
PTFE multi-layer bearings with back metals P.151
LF Guides
･････････
Guide unit bearings P.164
Techmet B/E
･･････
PTFE multi-layer bearings with back metals P.166
Toughmet
････････
Solid-lubricant dispersed sintered bearings with back metals
P.170
Toughmet D
･･････
Wear resistant special additive dispersed sintered bronze bearings with back metals
P.173
Hiplast N/E
･･･････
Metallic mesh PTFE composite bearings P.179
500SP
1
････････････
High-strength brass bearings with embedded solid lubricant
P.185
500SP
4
････････････
High-strength brass bearings with embedded solid lubricant
P.209
500SPR
･･･････････
Hard special copper alloy bearings with embedded solid lubricant
P.210
500SP
5
････････････
Special high-strength brass bearings with embedded solid lubricant
P.211
500HP
���･･･････････
Hard special copper alloy bearings with embedded solid lubricant
P.213
500AB
････････････
Aluminum bronze bearings with embedded solid lubricant
P.215
500B
･･････････････
Bronze bearings with embedded solid lubricant P.217
500F
･･････････････
Cast iron bearings with embedded solid lubricant P.221
500 Spherical
･････
Unit bearings P.227
2000
･･････････････
Sintered multi-layer bearings with dispersed solid lubricant
P.229
2000S
････････････
Sintered oil-impregnated bearings with dispersed solid lubricant
P.247
Shoe Units
････････
Unit bearings P.245
Cermet M
･････････
Sintered bearings with dispersed solid lubricant P.249
Cermet G
･････････
Sintered bearings with dispersed solid lubricant P.255
300
･･･････････････
Oil-impregnated expanded cast iron bearings P.259
600
･･･････････････
Wear-resistant copper alloy bearings P.269
Air Bearings P.273
S type
････････････
Guide rail type P.279
SE type
･･･････････
Guide rail type P.283
BA type
･･･････････
Guide shaft type P.293
BC type
･･･････････
Guide shaft type P.299
BF type
･･･････････
Guide shaft type P.303
BTU type
･････････
Unit type P.315
500 Guide Units BK type
･･
Guide unit bearings P.319
500 Guide Units BT type
･･
Guide unit bearings P.323
009-014_選定の目安.indd 12 19/09/19 9:51