JE-237 201 TR100

Specications

Item Model No.

S124M4-3-0

(Q'ty)

S124M4-3-1

(Q'ty)

S124M4 main body S124M4-X-A-0001 1 1

Har

d carrying case HCC-11 1 1

Battery pack S947 1 1

Spare electrode ELR-01 1 pair 1 pair

AC adapter S979 1 1

AC power cord ---- 1 1

Cooling tray CTX-03 1 1

Fiber reformer (4 fiber) FRF-01 1 pair 1 pair

Cleaning brush VGC-01 1 1

Electrode sharpener D5111 1 1

Tool case TCC-01 1 1

LCD antireflectifve sheet ARS-01 1 1

Rubber foot RBC-01 1 pair 1 pair

Quick Reference guide FTS-B559 1 1

Instruction manual UMC-03 1 1

Wi-Fi dongle WFD-01 0 1

Standard Package

Item Model No.

Soft carrying case SCC-01

Battery Charger S980

Angled Stand AGS-02

Strap plate SPL-01

Work belt WBT-01

USB cable USB-01

Car cigarettes cable CDC-04

Optional components

Item Model No.

Fiber holder ( 0.25mm coating fiber ) S712S-250

Fiber holder ( 0.90mm coating fiber ) S712S-900

Fiber holder ( 2 fiber ribbon ) S712A-002

Fiber holder ( 4 fiber ribbon ) S712A-004

Fiber holder

Fbier count, pitch Model No.

0.25mm pitch 4 fiber FGV-04-P250

Fiber Guide V-groove

Environmental Durability

Drop impact

Vertical drop test (5sides excluding the top side) is conducted from a

height of 76cm and the normal operation is confirmed.

Impact

protection

The normal operation is confirmed after dropping a 500grams weight of

IK 07 grade from the height of 40cm onto the equipment.

Dustproof

The normal operation is confirmed after putting the equipment in a

device containing dust of 25μm or less for 8hours.

Drip proof

The normal operation is confirmed after exposing water droplet of IPX 2

grade with 3mm/min to 4sides for 2.5min or more tilted by 15degree.

It is not the guarantee of no br

eak or no failure of this product since the test is performed

with the draft shield closed.

Applicable fibers

SM (ITU-T G.652 / G.657A1 / G.657A2)

MM (ITU-T G.651)

DS (ITU-T G.653)

NZD (ITU-T G.655)

BIF (ITU-T G.657.A1/A2)

Fiber Count Up to 4-fibers

Cladding diameter 125µm

Fiber coating

diameter

Single fiber 0.25mm, 0.9mm

Ribbon fiber Refer to Fiber Holder

Fiber cleaving length 10mm

Average splice loss

SM : 0.05dB MM : 0.03dB

DS : 0.08dB NZD : 0.08dB BIF : 0.05dB

Typical splice time

4-fiber ribbon : 13sec.

Single fiber : 13sec.

Typical heating time

4-fiber ribbon : 14sec. (S924, power mode)

Single fiber : 13sec (S921, power mode)

Splice program Max. 300

Heat program Max. 100

Applicable protection

sleeve length

40mm / 60mm

Tension test 1.96N

Discharge compensation

function

Automatic correction according to temperature and

atmospheric pressure

Optical fiber viewing method Two-way observation from X and Y axes

Monitor 4.3 inch wide LCD monitor with touch screen

Magnification 56X

Splice result storage /

Image capture capacity

Last 10,000 splices /

Last 100 images to be automatically captured

Dimensions

139W x 209D x 114H mm not including shock absorber

179W x 246D x 131H mm including shock absorber

eight 1.8kg (with battery)

Data output USB ver.2 mini B x 1 port, Standard A x 1 port

Power source AC : 100-240V (50/60Hz) DC : 11-24V

Battery capacity

170 splice and heating cycles

Operating condition

Altitude : 0-2,000m Wind protection : 15m/s

Operating temperature :

10 to +50 °C (non-condensing)

Storage condition

40 to +60 °C (non-condensing)

*1 Corresponding to optical fiber in compliance with ITU-T recommendation.

This numerical number is the one when measur

ed for the purpose to show the fusion

splice characteristics in the testing method of IEC 61073-1, it is not the one to guarantee

the splicing loss.

Number of times that the fusion splicing of the fiber and the heat r

einforcement can be

performed continuously at a rate of once a 90seconds at the room temperature (20°C)

condition when using a new 100% charged battery. The number of times you can use

depends on the state of the battery and usage.

* Please understand that contents of this catalog may change without notice.

Export Control Regulations

The products and/or technical information presented in this publication may be subject to the application of the Foreign Exchange and Foreign Trade Act and other related laws and regulations in Japan.

In addition, the Export Administration Regulations (EAR) of the United States may be applicable.

In cases where exporting or reexporting the products and/or technical information presented in this publication, customers are requested to follow the necessary procedures at their own responsibility and cost.

Please contact the Ministry of Economy, Trade and Industry of Japan or the Department of Commerce of the United States for details about procedures.

Head Office:

2-3, Marunouchi 2-chome,

Chiyoda-ku, Tokyo,

100-8322, Japan

Tel: + 81 3 3286 3227

Fax: + 81 3 3286 3978

www.furukawa.co.jp

fec.abr

opt

splicer@furukawaelectric.com

Europe:

Furukawa Electric Europe Ltd.

Furukawa House

77-85 Fulham Palace Road,

London W6 8JD, U.K.

Tel: + 44 (0) 20 7313 5300

Fax: + 44 (0) 20 7313 5310

www.furukawa.co.uk

splicers@furukawa.co.uk

North & South America:

OFS Fitel, LLC

2000 Northeast Expressway

Norcross, Georgia 30071, U.S.A

Toll free: + 1 866 452 9516

Tel: + 1 678 783 1090

Fax: + 1 678 783 1093

www.ofsoptics.com

splicers@ofsoptics.com

China:

Furukawa Shanghai, Ltd.

Beijing Branch

Room 314, Beijing Fortune Building,

No.5, North Dongsanhuan Road,

Beijing 100004 P.R. China

Tel: + 86 10 8591 0608

Fax: + 86 10 8591 0609

www.furukawa-sh.cn

South East Asia:

Furukawa Electric Singapore

Pte. Ltd.

60 Albert Street, #13-10 OG

Albert Complex, Singapore

189969

Tel: + 65 6224 4686

Fax: + 65 6336 2635

comms@furukawa.com.sg

Model No. Applicable Fiber Length

S921 Single fiber, 0.25 - 0.9mm coating dia. 60mm

S922 Single fiber, 0.25 - 0.9mm coating dia. 40mm

S924 Single fiber and upto 8-fiber ribbon 40mm

Protection Sleeve