TYPICAL PERFORMANCE CHARACTERISTICS
SPECIFICATIONS
OPTIONS
Option P: Increased Pulse Capability
Option 37: Group A Screening per Mil-R-39008
Numerous design modifications are available (special
marking, matched sets, increased temperature, etc.)
Inch [mm]
1
Not to exceed
√
(PxR), increased working voltages available.
2
Extended range available
ECONOMICAL 1 WATT TO 3 WATT
POWER FILM MELF RESISTORS
MPF SERIES
FEATURES
High power in small body size
Low cost MELF design
Wide resistance range: 0.1Ω to 10MΩ
Standard tolerance: ±5% (available to ±0.1%)
Inherent low inductance power film performance
PULSE CAP ABILITY
MPF3P
MPF2P , 3SP
MPF2SP
MPF1P
Pulse capability is dependent on res. value, waveform, repetition rate,
current, etc. Chart is a general guide for Opt. P pulse resistant version,
single pulse, with peak voltage levels not exceeding 1KV MPF1, 1.5KV
MPF2S, 2KV MPF2, 2.5KV MPF3S, 3KV MPF3. Max pulse capability for
standard parts (w/o Opt.P) is 50% less. For improved performance and
reliability, a 30-50% pulse derating factor is recommended, or larger for
frequent pulses, high values, etc. (refer to #R-42). Verify selection by
testing under worst-case conditions. Increased pulse levels available.
RCD’s MPF Series utilize special filming processes and
highest grade materials to achieve high power density, yet
the economical MELF package enables pricing well below
rectangular counterparts. The multilayer coating offers
excellent environmental protection and dielectric strength,
and is resistant to industrial solvents, steam and humidity.
L
D
W
DCR
epyT
egattaW
gnitaR
egatloV
gnitaR
1
egnaRecnatsiseR
2
.xaML.xaMD).niM(W
1FPMW1V0031.0 Ω M1ot Ω ]5.6[652.]7.2[601.]9.[630.
S2FPMW2V0531.0 Ω M7.4ot Ω ]5.9[573.]7.3[641.]2.1[740.
2FPMW2V0041.0 Ω M8.6ot Ω ]5.11[354.]7.4[581.]4.1[650.
S3FPMW3V0041.0 Ω M8.6ot Ω ]5.11[354.]7.4[581.]4.1[650.
3FPMW3V0041.0 Ω M01ot Ω ]3.51[206.]1.5[102.]6.1[460.
tneiciffeoCerutarepmeTC°/mpp002 ≤ ,M1
,M8.6-M1mpp053
)M8.6>mpp005
erutarepmeTgnitarepOC°561+ot55-
:gnitareDrewoP3,2,1FPM
:gnitareDrewoPS3,S2FPM
C°07>C°/%350.1
C°52>C°/%417.
htgnertScirtceleiDV005
ecnatsiseRnoitalusnImhogeM000,01
ytlibaredloS.niM%59
otton,S5Wx5.2(daolrevOemiTtrohS
)gnitartlovx2deecxe
;3,2,1FPM%5.0
S3,S2FPM%1
tneiciffeoCegatloVV/mpp52
)S5,C°542(taeHredloSotecnatsiseR%3.0
gnilcyCerutarepmeT%1
ecnatsiseRerutsioM%2
)Wdetartasruoh0001(efiLdaoL;3,2,1FPM%2
S3,S2FPM%4
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
FA026D Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603
-
669
-
0054 Fax: 603
-
669
-
5455 Email:sales@rcdcomponents.com
19
P/N DESIGNA TION:
RCD Type
Tolerance : J= 5% (std), D=0.5%, F=1%, G=2%, K=10%
Packaging : B = Bulk, T = Tape & Reel
MPF2S - 102 - J T W
Options: P, 37 (leave blank if standard)
Resis. Code:
≤≤
≤≤
≤1%: 3 signif. figures & multiplier,
e.g. R100= 0.1Ω, 1R00= 1 Ω,1000= 100Ω, 1001= 1K Ω.
Resis. Code 2% - 10%: 2 signif. figures & multiplier,
e.g. R10=.1Ω, R15=.15Ω, 1R0=1Ω,100=10Ω, 102=1K, 103=10KΩ
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable,
in which case RCD will select based on lowest price and quickest delivery
The temp. rise of SM resistors depends largely on heat conduction
through the end terminations, which can vary significantly
depending on PCB material and layout (i.e. pad size, trace area,
copper thickness, air convection, etc). Typical temperature rise at
full rated power is 100°C for MPF1,2,3 and 150°C for MPF2S & 3S
(based on DIN44050 PCB material with 500 sq. mil circuit traces
MPF1, 2, 2S and 1000 sq. mil MPF3,3S). It is recommended to
evaluate product in actual use conditions to ensure the proper
component and PCB layout is utilized.
APPLICA TION NOTE
10000
1000
100
10
Peak Power (watts)
1µS 10µS 100µS 1mS 10mS 100mS
Pulse Duration
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible