Product Brief

1EDI EiceDRIVER™ Compact

1200 V galvanically isolated single-channel driver IC family

Our new 1EDI EiceDRIVER™ Compact family complements our extensive range of high-

voltage driver ICs for a market that demands easy-to-use drivers with a small footprint

for quick design-in cycles. The driver family is based on Infineon’s coreless transformer

technology, enabling a benchmark setting minimum common mode transient immunity

(CMTI) of 100 kV/μs.

The drivers provide output currents of up to 6 A on separate output pins for applications

up to 1200 V. They are ideal for the use in industrial drives, charge stations for electric

vehicles, power supplies for servers and telecommunications systems, and welding

equipment.

Six versions are available with separate source and sink outputs for MOSFET and IGBT

switches. The MOSFET drivers are optimized for designs using CoolMOS™ technology.

Due to lower inductive losses, these drivers enable an additional gain in eiciency of 0.5

percent with the latest generation of CoolMOS™ C7. Three IGBT-only versions are

designed to limit the gate voltage using an active Miller clamp.

The 1EDI60N12AF and 1EDI20N12AF for MOSFETs supply 2 and 6 A of output current on

separate output pins for gate charging and discharging purposes. A propagation delay

mismatch trimmed down to less than 10 ns and an input filter time of only 40 ns are ideal

for high switching frequency applications of up to 4 MHz such as switched mode power

supplies. The 1EDI05I12AF, 1EDI20I12AF, 1EDI40I12AF, and 1EDI60I12AF for IGBTs provide

output currents between 0.5 and 6 A. The 1EDI30I12MF, 1EDI20I12MF, and 1EDI10I12MF

with Miller clamp deliver output currents of 1, 2, and 3 A, respectively. All variants are

oered in a compact, halogen-free 150 mil DSO-8 package.

›

Single channel isolated driver

›

Input to output isolation voltage

up to 1200 V

›

For high voltage power MOSFETs

and IGBTs

›

Up to 6 A minimum peak

rail-to-rail output

›

Separate source and sink outputs

or active Miller clamp

MOSFET:

›

Switched mode power supplies

›

PFC stages

›

Servers

›

Solar systems

›

Buck/boost converters

IGBT:

›

General-purpose inverters (GPI)

›

Drives

›

Welding equipment

›

IH industrial and cooking appliances

›

Solar inverters

›

Uninterruptible power supplies

Key features

Applications

www.infineon.com/eicedriver-compact

Product Brief

1EDI EiceDRIVER™ Compact

1200 V galvanically isolated single-channel driver IC family

Variant with separate source/sink output

Circuit diagram for IGBT

Variant with output and active miller clamp

Circuit diagram for IGBT, unipolar (e.g. with TRENCHSTOP

Detailed product features:

GND 1

IN+

IN-

VCC1

OUT

VCC 2

GND2

CLAMP

SGND

GND 1

IN+

IN-

VCC1

OUT+

VCC 2

GND2

OUT-

SGND

Sales Code 1EDI60N12AF 1EDI20N12AF 1EDI60I12AF 1EDI40I12AF 1EDI20I12AF 1EDI05I12AF 1EDI30I12MF 1EDI20I12MF 1EDI10I12MF

Package DSO-8 (150mil) DSO-8 (150mil) DSO-8 (150mil)

Applications SMPS, PFC, telecom,

server, solar, buck/boost

converter, PC power

General-purpose inverter (GPI),

drives (general purpose & servo), welding,

IH industrial and cooking, solar inverter, UPS

General purpose inverter (GPI),

industrial drives, welding, IH industrial,

solar inverter, UPS

Voltage class up to 1200 V up to 1200 V up to 1200 V

Output current 6 A / -6 A 2 A / -2 A 6 A / -6 A 4 A / -4 A 2 A / -2 A 0.5 A / -0.5 A 3 A / -3 A 2 A / -2 A 1 A / -1 A

Separate source/

sink output

✓ ✓ ✓ ✓ ✓ ✓

– – –

Active Miller clamp – – – – – –

✓ ✓ ✓

UVLO MOSFET IGBT IGBT

Propagation delay 120 ns 120 ns 300ns 300ns

Max. switching frequency 4 MHz

4 MHz

1 MHz

Recommendation CoolMOS™ C7

**)

, CP All 650V and 1200V IGBT modules All 650V and 1200V IGBT modules

Common highlights:

›

Common Mode Transient Immunity (CMTI): 100 kV/µs (best in class)

›

Wide input operation range (3 .. 17 V)

›

Benefit: no voltage/signal adaptation between µC and driver necessary

do not exceed max. power dissipation

**)

1EDI60N12AF enables an extra 0.5 % eiciency gain by reducing inductance losses

Published by

Infineon Technologies AG

85579 Neubiberg, Germany

Order Number: B114-H9859-V3-7600-EU-EC-P

Date: 05 / 2016

Please note!

THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND

ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE

REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF

ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR

PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE.

WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR

PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT

PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND

THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE

THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED

APPLICATION.

WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR

THE INFORMATION GIVEN HEREIN AT ANY TIME.

Additional information

For further information on technologies, our products, the

application of our products, delivery terms and conditions

and/or prices, please contact your nearest Infineon Technologies

oice (www.infineon.com).

Warnings

Due to technical requirements, our products may contain

dangerous substances. For information on the types in question,

please contact your nearest Infineon Technologies oice.

Except as otherwise explicitly approved by us in a written

document signed by authorized representatives of Infineon

Technologies, our products may not be used in any life-

endangering applications, including but not limited to medical,

nuclear, military, life-critical or any other applications where a

failure of the product or any consequences of the use thereof

can result in personal injury.