DISCLAIMER – Products, information, drawings, specifications and reference numbers (hereafter “contents”) discussed herein are for reference purposes only. All contents herein are provided on an “as is” basis,
without warranties of any kind. The contents discussed herein remain the sole and exclusive property of MTA S.p.A. and shall not be copied, translated in whole or in part without MTA S.p.A. prior written consent. No
license of any patent, copyright, mask work, trademark or any other intellectual property right is granted under this document, by implication, estoppel or otherwise. Contents may be modified and changed by MTA S.p.A.
without any notice. For updates or additional information about MTA products, please contact your nearest MTA office. All brand names, trademarks and registered trademarks belong to their respective owners.
www.mta.it
C-MEC 138 | TECHNICAL DATA SHEET | VERSION 1.0 (PRELIMINARY) – OCTOBER 2019
2
CUSTOMIZATION LEVELS
SOFT
MEDIUM
HIGH
Fuses and relays
Type and number
of contents (mask)
PCB
Connectors
Fuses and relays
Type and number
of contents (mask)
PCB
Connectors
Fuses and relays
Type and number
of contents (mask)
PCB
Connectors
There are 3 customization levels: Soft, Medium and High, where:
means “customizable component”, means “default component”.
NOTE: supply status could be with or without fuses and relays (according to
customers’ requests).
EXPLODED VIEW
Fuses and relays
Fuses/relays mask
PCB
Bottom cover
Tab headers
for connectors
PCB ASSEMBLY: PRESS-FIT TECHNOLOGY
All components are assembled on the PCB top side with the press-fit
technology.
The press-fit is an innovative solderless connection technology. In this
process the contact between the press-fit pin and the wall of the hole is
gas-tight and it is characterized by good conductivity and high mechanical
resistance. The condition is that the press-fit pin has a bigger dimension
than the hole diameter on the PCB and this interference guarantees a
highly conductive bond.
Advantages compared to conventional soldering:
• No need for additional washing.
• No thermal load on the PCB or electronic components.
• Quick and economic insertion of the PCB.
• Double-sided insertion of the circuit board.