ALUMINUM ELECTROLYTIC CAPACITORS
SPECIFICATIONS
Item Performance Characteristics
Category Temperature Range -25 ~ +105℃
Working Voltage Range 200 ~ 450Vdc
Capacitance Range 6.8 ~ 470 μF
Capacitance Tolerance ±20% (at 25℃ and 120Hz)
Dissipation Factor
(tanδ)
(at 25℃, 120Hz)
The above values should be increased by 0.02 for every additional 1000μF
Rated Voltage (V) 200 250 350 400 420 450
tanδ(Max) 0.20 0.20 0.20 0.20 0.20 0.20
Leakage Current
I=0.02CV or 3000 μA whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 2 minutes.
Endurance
The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 2,000 to 5,000 hours at 105℃.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25℃ after exposing
them for 1,000 hours at 105℃ without voltage applied.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ 200% of the specified value
Others Conforms to JIS-C-5101-4 (1998), characteristic W.
DIMENSIONS (mm)
PV Series
Downsize and high ri p pl e current
Load life 2,000 ~ 5,000 hours at 105℃
ФD 10
12.5 L＜35
12.5 L≥35 16 18
ФD ФD +0.5 Max ФD +1.0 Max
Фd 0.6 0.6 0.8 0.8 0.8
F 5.0 5.0 5.0 7.5 7.5
Size Life time (hours)
ФD≦12.5Ф 2,000
ФD≧16 Ф 5,000
ALUMINUM ELECTROLYTIC CAPACITORS
PV Series
Case size & Permissible rated ripple current: (mA rms) at 105℃ / 120Hz
200 250 350
Vdc
uF
ФD × L RC ФD × L RC ФD × L RC
6.8 10×16 90
10 10×16 100 10×20 110 10×20 110
15 10×16 110 10×20 130 10×20 130
22 10×20 180 10×20 180 12.5×20 235
33 10×20 215 12.5×20 245 12.5×25 265
47 12. 5×20 310 12.5×25 340 16×25 400
68 12.5×25 420 16×25 460 18×25 510
82 16×25 490 16×25 490 18×32 570
100 18×25 560 18×25 610 18×36 650
120 18×25 600 18×25 650 18×40 750
150 18×32 780 18×32 810 20×34 840
220 18×36 920 18×36 940
330 18×40 1010
18×50 1050
390 18×45 1130
470 18×50 1270
400 420 450
Vdc
uF
ФD × L RC ФD × L RC ФD × L RC
6.8 10×16 90 10×16 90 10×20 80
10 10×20 110 10×20 110 12.5×20 130
15 12.5×20 180 12.5×20 180 12.5×20 160
22 12.5×25 240 12.5×25 240 12.5×25 200
33 16×25 280 16×25 290 16×25 310
47 16×32 390 16×32 390 18×25 400
68 16×36 505 16×40 510 18×32 550
82 18×32 560 18×32 570 18×36 635
100 18×36 640 18×36 610 18×40 720
120 18×40 745 18×40 660 18×45 770
150 18×45 760 18×50 710 18×50 820
RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Frequency (Hz)
Vdc
50/60 120 1K 10K 100K
200 ~ 350 0.80 1.00 1.20 1.30 1.40
400 ~ 450 0.80 1.00 1.15 1.25 1.35