1
1.8V, 42μA, RRIO, Zero Drift Op-amps
Features
LOW OFFSET VOLTAGE: 10 μV (Max)
ZERO DRIFT: 0.008 µV/°C
0.1Hz to 10Hz Noise: 1.1 µV
PP
Low Supply Current: 42µA per Amplifier
Bandwidth: 350 kHz
Slew Rate: 0.16 V/μs
High Gain, 130 dB High CMRR and PSRR
Rail-to-rail Input and Output Swing
–40°C to 125°C Operation Range
Small Packages: SC70 and SOT23 (TP5531)
Applications
Transducer Amplifier
Bidirectional Current Sense
DC Offset Correction
Temperature Measurement
Remote Located Sensors
Battery-Powered Instruments
Electronic Weigh Scales
Pin Configuration
(Top View)
Description
The 3PEAK TP5531/2/4 low-power chopper stabilized
operational amplifiers provide input offset voltage
correction for very low offset and offset drift over time and
temperature. The devices operate with a single supply
voltage as low as 1.8V, while drawing 42μA per amplifier
of quiescent current with a gain bandwidth product of
350kHz. They are unity gain stable, have no 1/f noise,
have good Power Supply Rejection Ratio (PSRR) and
Common Mode Rejection Ratio (CMRR), and feature rail-
to-rail input and output swing.
The devices were designed using an advanced CMOS
process. The TP5531 (single version) is available in
SC70-5, SOT23-5 and SO-8 packages. The TP5532
(dual version) is offered in MSOP-8 and SO-8 package.
The TP5534 (quad version) is available in TSSOP-14 and
SOIC-14 package. All versions are specified for operation
from -40°C to 125°C .
3PEAK and the 3PEAK logo are registered trademarks of
3PEAK INCORPORATED. All other trademarks are the property of their
respective owners.
Related Zero-Drift Op-amps
TP5531U
SOT23-5/SC70-5
(-T and -C Suffixes)
5
4
3
2
1
+IN
-IN
V-
V+
OUT
TP5531
SOT23-5/SC70-5
(-T and -C Suffixes)
5
4
3
2
1
OUT
+IN
V-
V+
-IN
500nV/div
5s/div
0.1Hz to 10Hz NOISE