Data Sheet
Danfoss Icon™ App module
© Danfoss | FEC | 2018.12 | 1
VDMCC102
Description
Danfoss Icon™ App Module is used to enable wi
and APP control on the Danfoss Icon™ 24V Master
Controller.
The App Module is connected using a shielded
patch cable (2 m cable included in box).
Once connected to a smart phone or tablet the
system can be shared across devices in the house-
hold.
App Module will enable:
• Remote access
• Scheduling
• Away, comfort and holiday mode
• System alarms on your device e.g. low battery on
thermostat
Ordering
Product Code number
Danfoss Icon™ App Module 088U1101
2 | © Danfoss | FEC | 2018.12
AI289338247790en-000101 | VDMCC102
Drawings
29 69
125
Danfoss Icon™ App Module 088U1101
Tecnical data
Purpose of control Wi-Fi transmitting and receiving device,
incl. Bluetooth
Ambient temperature range, continious use 0 °C to +40 °C
Frequency 2,4 GHz
Encapsulation (IP Class) IP 20
Conformity declared acc. to following directives RED, RoHS, WEEE
Protection class Radio Class III
Supply voltage 5 VDC
Temperature for the ball pressure test 75 °C
Control polution degree Degree 2, normal household environment
Software class Class A
Rated impulse voltage 4 kV
Operating time Permanently connected
Temperature range, storage and transportation -20 °C to +65 °C
Dispossal instructions The product must be disposed as electronic
waste.