Surface Mount Transient Voltage Suppressors
@ SOCAY Electronics Corp., Ltd. 2018
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
SOCAY Electronics Corp., Ltd. www.socay.com
Junction passivation optimized design passivated anisotropic
T
J
=175℃capability suitable for high reliability and automotive
Available in uni-directional polarity only
Low forward voltage drop
Meets ISO16750-2 surge specification(varied by
Meets MSL-1, per J-STD-020, LF maximum peak of 245℃
Compliant to RoHS directive 2002/95/EC and in accordance
to WEEE 2002/96/EC
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application
Plastic pa
Case:DO-218B
Molding compound meets UL 94V-0 flammability rating
Base P/NHE3-RoHS-compliant, AEC-Q101 qualified
Terminals:Matte tin plated leads, solderable per J-STD-002 and
JESD22-B102
Peak pulse power dissipation on 10/1000μs waveform
Peak pulse power dissipation on 10/10000μs waveform
Power dissipation on infinite heat sink at T
C
=25℃
Peak pulse current with 10/1000μs waveform
Peak forward surge current, 8.3ms single half sine-wave
Operating junction and storage temperature range
Typical thermal resistance, junction to case
Note
(1) Non-repetitive current pulse derated above T
A
=25℃
Maximum Ratings(T
C
=25℃,RH=45%-75%,unless otherwise noted)