Dispensing Valves
A Leader in the Design & Manufacture of Advanced Electromechanical Products
Deltrol
CONTROLS
www.deltrol-controls.com ISO 9001:2015 Certied
DSVP10(N) DSVP11(N) DSVP12(N) DSVP14(N) DSVP15(N)
General Description
All are 2-way, direct acting
dry plunger valves
Our largest valve, designed for
large capacity ow requirements
Multiple port and bracket options
to suit your application
Modular design for on-the-spot
conguration, high relative
sealing ability
This valve provides superior ow
and an easy-to-use ow rate
adjuster integral to the valve body
State-of-the-art fastner-less design,
excellent ow and consistency
Electrical Specications
Coil Voltages
24,120, 240 VAC, 50/60 HZ
12, 24, 36 VDC
24,120, 240 VAC, 50/60 HZ
12, 24, 36 VDC
24,120, 240 VAC, 50/60 HZ
12, 24, 36 VDC
24,120, 240 VAC, 50/60 HZ
12, 24, 36 VDC
24, 100, 120, 200, 240 VAC
50/60 HZ, 12, 24, 36 VDC
Internally rectied AC Coils [1] No Yes Yes/ Non-rectied version available Yes Yes
Coil Powers 30 W (standard) 12 W (AC), 11 W DC (standard) 12 W (AC), 11 W DC (standard) 12 W (AC), 11 W DC (standard) 14 W (AC), 12 W (DC) (standard)
Coil Termination 0.25” spade terminals 0.25” spade terminals (standard)
Lead Wires
DIN 43650 Form A
Deutsch DT04-2P
0.25” spade terminals (standard)
Lead Wires
DIN 43650 Form A
Deutsch DT04-2P
0.25” spade terminals 0.25” spade terminals
Duty Cycle Intermittent (standard) Continuous (standard) Continuous (standard) Continuous (standard) Intermittent 50%, 1 minute on
Normal Ambient Temp 95° F (35° C) 95° F (35° C) 77° F (25° C) 95° F (35° C) 113° F (45° C)
Coil Treatment Polyester Encapsulated Polyester Encapsulated Polyester Encapsulated Polyester Encapsulated Polyester Encapsulated
Insulation Class Class F 311° F (155°C) Class F 311° F (155°C) Class F 311° F (155°C) Class F 311° F (155°C) Class F 311° F (155°C)
Mechanical Specications
Media
Water and Water-Based Solutions
up to 210° F (98° C) Polysulfone Body
up to 170°F (77° C) Nylon Body
Water and Water-Based Solutions
up to 210° F (98° C) Polysulfone Body
up to 170°F (77° C) Nylon Body
Water and Water-Based Solutions
up to 210° F (98° C) Polysulfone Body
up to 170°F (77° C) Nylon/Noryl® Body
Water and Water-Based Solutions
up to 210° F (98° C)
Water and Water-Based Solutions
up to 210° F (98° C)
Max. Head Pressure 18” W.C. Standard, up to 40”
optional
12” W.C. Standard, up to 72”
optional
30” W.C. Standard, up to 72”
optional
12” W.C. Standard, up to 72”
optional
24” W.C. Standard (0-60) mbar
Max. Flow Rate @ 4” w.c.
(water @ 73° F)
3.6 oz/sec 1.5 oz/sec (0.302 valve seat)
1.9 oz/sec (0.406 valve seat)
1.1 oz/sec (#5 valve body)
1.8 oz/sec (#2 valve body)
1.6 oz/sec (standard version)
1.75 oz/sec (high ow version)
1.7 oz/sec
Max Flow Rate 12” w.c.
(water @ 73°F)
5.8 oz/sec 2.5 oz/sec (0.302 valve seat)
3.3 oz/sec (0.406 valve seat)
2.0 oz/sec (#5 valve body)
3.0 oz/sec (#2 valve body)
2.5 oz/sec (standard version)
2.8 oz/sec (high ow version)
2.7 oz/sec
Inlet/Outlet Connection Ø0.77 barb/ Ø0.77 barb Ø0.62 OD with O-ring/
Ø0.63 or Ø0.50 barb
1/4-18 NPTF / Ø0.63 or Ø0.50 barb
Ø.47 or Ø.53 OD/ Ø0.50 barb
Ø0.63 barb / Ø0.63 barb
G1/2-14 thread / G1/2-14 thread
Ø0.57 barb / Ø0.57 barb inline
Ø0.47 OD / Ø0.50 barb
Ø0.67 barb / Ø0.69 barb
Ø0.75 barb / Ø0.69 barb
Ø.62 OD with O-ring / Ø0.51 barb Ø.50 OD for grommet seal /
Ø.50 barb
Ø.59 OD for grommet seal /
Ø.50 barb
Bracket Options Available in 90° increments
See website for details
Available in 90° increments
See website for details
Available in 90° increments
See website for details
Available in 90° increments
See website for details
None
Optional Vent Tube No Yes Yes Yes Yes
Normally Open Version Option Yes - DC only Yes No Yes No
Flow Adjuster Option Yes - Backstop Adjuster Yes - Backstop Adjuster No Yes - integral to valve body Yes - integral to valve body
Valve Body Material Polysulfone, Nylon Polysulfone, Nylon Noryl®, Polysulfone, Nylon Polysulfone Polysulfone
Diaphragm Material Silicone, Viton®, EP Silicone, Viton®, EP, EPDM Silicone, Viton® Silicone Silicone
Weight 14 oz. 8 oz. 7.5 oz. 7.6 oz. 5.5 oz
Agency Approvals [*]
NSF
NSF-169 listed on most valves with
silicone diaphragms
NSF-169 listed on most valves with
silicone diaphragms
NSF-169 listed on most valves with
silicone diaphragms
NSF-169 listed on most valves with
silicone diaphragms
NSF-169 listed on most valves with
silicone diaphragms
UR & cUR File No. MH12958 File No. MH12958 File No. MH12958 File No. MH12958 File No. MH12958
Other
US Patent No.
6,684,901 7,938,383
Product Description
Deltrol Controls Liquid Dispensing Valves are direct-acting, gravity fed (up to 3 psi) valves primarily designed to
dispense water (up to 210°F) or similar media from a tank. The most common applications for our valves are hot
beverage and vending equipment, ice machines, and oor scrubbers. Deltrol Controls oers 5 types of Liquid
Dispensing Valves, each providing unique features for your application. Each of these valves is briey described
in this brochure, and complete product information can be obtained by visiting our website at www.deltrol-
controls.com.
Principle of Operation
The following illustration shows a common Liquid Dispensing Valve. A water source is typically connected to
the inlet port of the valve and the valve controls the ow of uid to the outlet port. In the closed position, the
diaphragm is biased against a valve seat by a spring, preventing water ow. When power is applied to the coil,
the plunger and diaphragm move away from the valve seat, allowing liquid to pass through the valve.
Features
• Polyester encapsulated Class F coils
• Standard coil termination: 0.25” X 0.03” male quick connect terminals
Termination options for DSVP11 and DSVP12 models include: Lead wires, DIN 43650
Form A, and Deutsch DT04-2P
• UL recognition (US and Canada) for most models
• NSF listing on most valves with silicone diaphragms
• ENEC Certication on select DSVP12(N) and DSVP15 models
• Optional QF “Quiet Flow” coil for quiet AC operated valves (not available on all models) [1]
• Optional vent tube available on select models to allow for full release of outlet media
• Life expectancy: 125,000 cycles under normal conditions
• Multiple inlet and outlet congurations available – special designs may be available upon request
• Multiple material options available to suit your specic application
RoHS Compliance
This product is compliant with RoHS Directive (2002/95/EC) and RoHS Recast (2011/65/EU). This declaration is based on a
combination of supplier declarations and testing to EN 62321
[1] AC coils that are internally rectied may require protection from transient voltages. It is recommended that a metal-oxide varistor (MOV) be
placed in parallel at the coil.
[2] The CE Mark on Deltrol components indicates that the component is designed for use in a product required to comply with CE marking directives;
certication to the LVD directive is only practical once the component is fully integrated into a nished product under the scope of either directive.
Dispensing Valves
Valve OpenValve Closed
Valve Body Options
DSVP11 DSVP12