LED Driver C.C. 320W with High Input Voltage Series
PS_LDD-320-CC&HHV-Series_ARHPT_v2c.docx Page 1
Main Features:
Input Voltage: 180~528Vac or 250~740Vdc
Output Wattage: Constant Current (without “P”)
or Constant Wattage (C.P.) at 320W
with Adjustable Current Setting
Programmable Method: Wire or Wireless
High Efficiency: Up to 90%
Dimming Function: 0-10V/PWM
Auxil ia ry Vol ta g e : 12Vaux with 300mA
Lightning Protection: Built-in Surge Protector at 10KV/5KA
Reliability Protection: OVP, SCP, OTP
Safety Regulation: Complies with UL8750 & EN61347
Type TL and HL Program Certified from UL
Class P UL standard for retrofit kit
Waterproof Rating: IP67
Five Year Warranty under Normal Usage Conditions
SPECIFICATION
Model No.
(i)
Output Voltage
Range
Programmable Output
Constant Current Range
OVP OTP Case Temperature
(Vdc)
(mA)
(i)
(Vdc max.)
(°C)
(ii)
(Tc)
LDD-320D229-1400HH-V
n/a -
120% Vomax , typ.
Tc
≧
105±10
℃
90C
LDD-320D229P1400HH-V
137 - 305 1050 – 1400
120% Vomax , typ.
Tc
≧
105±10
℃
90C
LDD-320D152P2100HH-V
91 – 229 1400 - 2100
120% Vomax , typ.
Tc
≧
105±10
℃
90C
LDD-320D076P4200HH-V
46 – 114 2800 - 4200
120% Vomax , typ.
Tc
≧
105±10
℃
90C
Note
(i)
Pre-set Constant Current Value with dimming
(ii)
Lower the output current when Tc
≧
105±10
℃
; Auto Recovery When Tc
≦
70±10
℃
Input Spec. Condition Description Min. Normal Max. Units
Input Voltage Range
Dedicated High Voltage Input
180 208-480 528
VAC
Input Frequency Range
47
50/60
63 Hz
Input Current
277 VAC/480 VAC input, full load output
1.3/0.75 A
Power Factor
@60% - 100% load
＞0.9
THD (t otal harmonic
distortion)
@60% - 100% load
<15
%
Inrush Current
At 277 VAC input, 25°C cold start / At 480 VAC input, 25°C cold start
65 / 70 A
Leakage Current
max @277Vac 60Hz
1.0 mA
LED Driver C.C. 320W with High Input Voltage Series
PS_LDD-320-CC&HHV-Series_ARHPT_v2c.docx Page 2
Surge Protection
Line to line 6kV, line to ground 10kV, IEC 61000-4-5
Output Spec. Condition Description Min. Normal Max. Units
Current Accuracy
±5 %
Ripple Current
At 100%-60% Load. The result differs according to different LED
load characteristic.
5 % Ip-p (Io)
Overshoot/Undershoot % of Iout max & LED load 10 %
Turn-On Delay
Startup time at cold start 1.2 s
Auxiliary Power (Vaux)
With 300mA max -5% 12 +5% Vdc
General Spec. Condition Description Min. Normal Max. Units
Efficiency
Measured at full load in the thermal balanced condition 92 93 %
MTBF
measured at Tc= 75℃ (MIL-HDBK-217F)
≥280,000 Hours
Lifetime
measured at Tc= 75℃
≥100,000 Hours
Operating/Storage
Temperature
10%RH～100%RH (See De-rating Curve for more details
-40/-40 70/85 °C
Dimension
(OL/L x W x H)
OL is the overall length with mounting plates
263/236*90*41.5
mm
10.35/9.29*3.54*1.63
inch
Weight
Net weight without package 3.52/1.6 lb/kg
Safety & EMC Compliance Category Condition Description
Safety Regulations
UL8750
Light Emitting Diode(LED) Equipment for Use in Lighting Products
UL1012
Power Unit Other Than Class 2
IEC 61347-1
Lamp Controlgear Part 1: General and Safety Requirements
IEC 61347-2-13
Lamp Controlgear Part 2-13: Particular Requirement for d.c. or a.c. Supplied Electronic Controlgear foe LED
Modules
CE Europe: EN 61347-1, EN61347-2-13
EMI Standards
IEC 55015 Conducted emission test & Radiated emission test
IEC 61000-3-2 Harmonic current emissions; Class C (≥75% load)
IEC 61000-3-3
Voltage fluctuations & flicker
FCC Part 15
Class B
EMS Standards
IEC 61000-4-2 Electrostatic discharge (ESD)
IEC 61000-4-3 Radio frequency electromagnetic field susceptibility test (RS)
IEC 61000-4-4 Electrical fast transient (EFT)
IEC 61000-4-5 Surge immunity test L-N:2kV; LN-PE:4kV (Extemal Surge Protection Device 4K/6K or 6K/10K)
IEC 61000-4-6 Conducted radio frequency disturbances test (CS)
IEC 61000-4-8 Power frequency magnetic field test
IEC 61000-4-11 Voltage dips
IEC 61547 Electromagnetic immunity requirements applies to lighting equipment