Instruction manual

Rack Mount BracketKRB1-PWX

This product is a rack mount bracket designed specifically for Kikusui PWX Series

Regulated DC Power Supplies

Components

Check that all parts are included and that they are not damaged. If any of the parts are

damaged or missing, contact your Kikusui agent or distributor.

Assembly

Remove the rubber feet for the bottom of the PWX Series.

Loosen the screws to remove the rubber feet (in four locations).

Attach the handles and brackets to the PWX series using the M4

screws.

No. Parts Code Description Quantity

1 B9-000-170 Rack mount bracket (R) KRB1-PWX (R) 1

2 B9-000-171 Rack mount bracket (L) KRB1-PWX (L) 1

3 E6-000-027 Handle 2

4 M2-101-015 Handle and Rack mount bracket screw (M4x8) 8

5 M3-112-043 Rack mount screw (M5x14) 4

M4 screw (4 locations)

Rack mount bracket (L)

Rack mount bracket (R)

Handle (2 locations)

Attach the PWX series to a rack

Use M5 screws to attach the power supply to a rack.

 When attaching the power supply to a JIS millimeter rack

 When attaching the power supply to an EIA inch rack

The instrument may fall. Install the suitable

support angles applying to the used rack sys-

tem to support the instrument.

Use the center grooves

to attach the power

supplies to the rack.

There are two spare screws.

M5 screw (2 locations)

Use the upper and lower

holes to attach the power

supply to the rack.

M5 screw (4 locations)

Support angle

Instrument

CAUTION

KIKUSUI ELECTRONICS CORP.

1-1-3 Higashiyamata, Tsuzuki-ku, Yokohama, 224-0023, Japan

Tel: +81-45-482-6353

Fax: +81-45-482-6261

http://www.kikusui.co.jp/enWebsite

The newest version of the operation manual can be downloaded from Download service