Instruction manual
Rack Mount Adapter KRB1-KFM
This product is a rack mount adapter for attaching Kikusui KFM2151 FC scanner to a rack.
This can be used with JIS millimeter racks and EIA inch racks.
Components
Check that all parts are included and that they are not damaged. If any of the parts are damaged or missing, contact your Kikusui
agent or distributor.
Assembly
Carry out the procedure below to attach the adapter to the KFM Series and mount it on the rack.
1 Remove the feet for the bottom and external cover of the FC scanner.
We recommend that you keep all the parts so that you can use them again when you detach the product from the frame.
2 Use the included M3 flat head screws to attach the rack mount brackets to the FC scanner.
No. Parts Code Description Quantity
1 B9-000-055 Rack mount bracket KRB1-KFM L/ R 2
2
M2-101-011
Rack mount bracket screw (M3 flat head)
2
3 M3-112-043 Rack mount screw (M5) 4
Foot (4 locations)
Screw (M3)
(4 locations)
Screw for external cover (M3)
(2 locations)
Loosen the screws to remove the
feet (in 4 locations).
M3 flat head screw (2 locations)
Rack mount bracket (2 locations)