User’s Manual
PART NO. IB031115
Aug. 2018
400W model
PWR401L PWR401ML
PWR401MH PWR401H
800W model
PWR801L PWR801ML
PWR801MH PWR801H
1200W model
PWR1201L PWR1201ML
PWR1201MH PWR1201H
Regulated DC Power Supply
PWR-01 Series
Component Names 8
Installation and Preparation 13
Connecting the Power Cord 14
Load Considerations 18
Selecting the Load Cables 20
Output Terminal Insulation 22
Connecting to the Output Terminals 24
Turning the Power On 28
Remote Sensing function 30
Basic Features 33
Measured Value Display and Setting Display
34
Panel Operations 36
Output Operation 37
Operation Overview 41
CV Power Supply and CC Power Supply 43
Using the PWR-01 as a CV or CC Power
Supply
45
Protection functions 46
CONFIG Settings 54
Preset Memory function 70
Locking Panel Controls (Key Lock) 71
CONFIG Shortcut function 72
Switching from Remote Mode to Local Mode
73
Advanced Features 75
Bleeder Circuit function 76
Variable Internal Resistance function 78
Sequence function 79
Synchronized Operation 80
External Control 83
Product Operation 84
About the J1/ J2 Connectors 84
Notes for Connecting External Voltage (Vext)
88
Output voltage control 90
Output Current Control 92
Controlling the Output On and Off States 94
Controlling Output Shutdown 96
Controlling the Clearing of Alarms 97
External Monitoring 98
Parallel/ Series Operation 101
Master-Slave Parallel Operation 102
Series operation 108
Maintenance 113
Calibration 114
Cleaning 116
Specifications 117
400W model 119
800W model 122
1200W model 125
Common specifications 128
Appendix135
2 PWR-01
These manuals are intended for users of the Regulated DC
Power Supply and their instructors. Explanations are given
under the presumption that the reader has knowledge of the
electrical aspects of regulated DC power supplies.
PWR-01 manual construction
User’s manual (this manual, PDF)
This manual is intended for first-time users of this product. It
provides an overview of the product, notes on usage, and
specifications. It also explains how to configure the product,
operate the product, perform maintenance on the product,
and so on.
Please read this manual before you operate the product.
Communication interface manual (PDF)
This manual describes remote control and multichannel
(Virtual Multi Channel Bus).
The interface manual is written for readers with sufficient
basic knowledge of how to control power supplies using a
PC.
Quick Reference
This document briefly explains the PWR-01 panel and the
basic operation of it.
Safety Information
This document contains general safety precautions. Keep
them in mind and make sure to observe them.
PDF files are included in the accompanying CD-ROM.
You can view the PDF files using Adobe Reader.
Firmware versions that this manual covers
This manual applies to products with firmware versions 1.1X.
When contacting us about the product, please provide us with
the following information.
Model (marked in the top section of the front panel)
Firmware version (see page 28)
Serial number (displayed on the top panel).
Trademarks
Microsoft, Internet Explorer, and Windows are registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
All company names and product names used in this manual
are trademarks or registered trademarks of their respective
companies.
Copyrights
The contents of this document may not be reproduced, in
whole or in part, without the prior consent of the copyright
holder.
The specifications of this product and the contents of this doc-
ument are subject to change without prior notice.
© 2017 Kikusui Electronics Corporation
About the PWR-01 Manuals
Accessories
Packing list (1 copy)
Safety Information (1 pc.)
CD-ROM (1 disk)
Output terminal M8 bolt set
(2 sets)
Output terminal M4 screws
(2 pcs.)
Chassis connection short bar (1 pc.)
Output terminal cover (1 set)
or
or
Included only with the 400W/800W model
Included only with the 1200W model
[E3-300-064]
* Only L type and ML type included.
Quick Reference
(Japanese: 1 pc, English: 1 pc.)
Power cord (1 pc.)
Rating: 125 Vac
Plug: NEMA5-15
Rating: 250 Vac
Plug: CEE7/7
Length: Approx. 2.5 m
[85-10-1070]
Rating: 250 Vac
Plug: GB1002
Length: Approx. 2.5 m
[85-10-0791]
The attached power cord varies
depending on the shipment destination.
Bottom [Q1-500-200]
Top [Q1-500-198]
Adapter [Q1-500-199]
• 400W model:
Length: Approx. 2.5 m
[85-AA-0004]
• 800W model:
Length: Approx. 3.0 m
[85-10-1030]
[M3-112-027]
[M1-100-012]
[M4-100-007]
[M5-100-007]
[M5-101-007]
Input terminal cover (1 set) Ferrite core set (1 set)
[M3-112-018]
[M3-112-015]
[P4-000-551]
[96-01-0370]
[D6-750-001]
[P1-000-410]