1 / 10
Specifications are subject to changes without notice.
www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
150W Programmable IP67 Driver with DALI
EUD-150SxxxBV Rev. E
Features
Description
The EUD-150SxxxBV series is a 150W, constant-current, programmable LED driver that operates from 90-
305 Vac input with excellent power factor. Created for high bay, tunnel and roadway lights, it provides a dim-
to-off mode with low standby power. The high efficiency of these drivers and compact metal case enables
them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free
operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.
Models
Output
Current
Range
Full-Power
Current
Range (1)
Default
Output
Current
Input
Voltage
Range(2)
Output
Voltage
Range
Max.
Output
Power
Typical
Efficiency
(3)
Power Factor
Model Number
(4)
120Vac 220Vac
65-1300mA 650-1300mA 700 mA
90~305 Vac/
127~250 Vdc
69~230Vdc 150 W 92.0% 0.99 0.96 EUD-150S130BV
130-2600mA 1300-2600mA 2100 mA
90~305 Vac/
127~250 Vdc
35~115Vdc 150 W 91.5% 0.99 0.96 EUD-150S260BV
260-5200mA 2600-5200mA 4200 mA
90~305 Vac/
127~250 Vdc
18 ~ 58Vdc 150 W 90.5% 0.99 0.96
EUD-150S520BV
(SELV)
Notes: (1) Output current range with constant power at 150W
(2) Certified input voltage range: 100-240Vac or 127-250Vdc (except KS)
(3) Measured at a 220Vac input with 100% maximum output current and 50% maximum output voltage.
(4) All the models are certificated to KS，except EUD-150S130BV
I-V Operating Area
Power-Limited Voltage-Limited
High Efficiency (Up to 92%)
Full Power at 50-100% Max Current (Constant Power)
DALI Dimmable and Dim-to-Off
Standby Power ≤1 W
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67)
SELV Output
Suitable for Independent Use
2 / 10
Specifications are subject to changes without notice.
www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
150W Programmable IP67 Driver with DALI
EUD-150SxxxBV Rev. E
Input Specifications
Parameter Min. Typ. Max. Notes
Input Voltage 90 Vac - 305 Vac 127~250 Vdc
Input Frequency 47 Hz - 63 Hz
Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz
Input AC Current
- - 1.8 A Measured at full load and 100 Vac input.
- - 0.85 A Measured at full load and 220 Vac input.
Inrush Current(I
2
t) - - 1.4 A
2
s
At 220Vac input,
25C Cold Start,
Duration=1.46 mS, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
PF 0.90 - -
At 100-277Vac, 60%-100% Load
(90-150W)
THD - - 20%
Output Specifications
Parameter Min. Typ. Max. Notes
Output Current Tolerance
-5%Ioset - 5%Ioset
At full load condition
Output Current Setting(Ioset)
Range
5%Iomax - 100%Iomax
Output Current Setting Range
with Constant Power
50%Iomax - 100%Iomax
Total Output Current Ripple
(pk-pk)
- 5%Iomax 10%Iomax At full load condition, 20 MHz BW
Output Current Ripple at
< 200 Hz (pk-pk)
- 2%Iomax
-
At full load condition. Only this component
of ripple is associated with visible flicker.
Startup Overshoot Current - - 10%Iomax At full load condition
No Load Output Voltage
EUD-150S130BV
EUD-150S260BV
EUD-150S520BV
-
-
-
-
-
-
275V
138V
70V
Line Regulation - - ±0.5% Measured at full load
Load Regulation - - ±1.5%
Turn-on Delay Time - 0.8 s 1.5 s Measured at 120Vac and 220Vac input.
Temperature Coefficient of
Ioset
- -
0.03%/C Case temperature = 0C ~Tc max
Note: All specifications are typical at 25C unless otherwise stated.