PRELIMINARY TECHNICAL DATA
DATASHEET 5460, Rev -
©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com
SDA1008
SDA1008S
SDA1008SS
Diode Array
Devices are serialized
Eight 1N5806 diodes in surface mount package
Die manufactured on qualified JANS line
Built and screened to space level quality (SDA1008SS)
Quality Conformance Inspection (QCI) in accordance with MIL-PRF-38534 is performed
on each lot (SDA1008SS)
Add suffix “S” for screening per MIL-PRF-38534, Class H (SDA1008S)
Add suffix “SS” for Space Level Screening per MIL-PRF-38534, Class K (SDA1008SS)
MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings at are T
A
= 25
O
C unless otherwise specified
RATING
SYMBOL
MAX
UNIT
Peak Inverse Voltage (DC)
PIV
150
V
Average DC Output Current per leg (1)
T
A
= 55
o
C
T
A
= 100
o
C
I
O
1.0
0.75
A
Peak Single Cycle Surge Current per leg (2)
(Tp=8.3ms single half-Sine wave)
I
fsm
10
A
Max. Operating Junction Temperature
T
J
-55 to +150
o
C
Storage Temperature Range
T
stg
-55 to +175
o
C
Maximum forward voltage @ 1A
V
f
1.0
V
Maximum Instantaneous Reverse Current At
Rated (PIV)
T
A
= 25
o
C
T
A
= 100
o
C
1
50
A
Max. Reverse Recovery Time I
F
=0.5 A, I
R
=
1.0A, I
RR
=0.25A
t
rr
35
ns
Thermal Resistance Junction to Case
JC
13
o
C/W
Note: (1) Total current is package dissipation limited to 3A
(2) Surge rating is limited by package wirebond
Electrical Schematic
PRELIMINARY TECHNICAL DATA
DATASHEET 5460, Rev -
©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com
SDA1008
SDA1008S
SDA1008SS
Mechanical Outline
.0 0 5
+ . 0 0 3
- . 0 0 1
.4 5 0 ± . 0 1 2
.0 3 8 ± . 0 0 8
.1 2 5
M A X
.0 1 5 ± . 0 0 5
P IN 1
.0 5 0
.0 1 5
.4 0 0
M A X
.2 8 5
M A X
PART ORDERING INFORMATION
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
Sensitron Screening Level
Screened In Accordance to:
-
-
S
MIL-PRF-38534, Class H
SS
MIL-PRF-38534, Class K