Linear Flat.

The plug & play system from BJB.

Can be used in linear and panel lighting applications

With our Linear Flat System, we are, for

the ﬁrst time, offering a complete lighting

module consisting of a light source, socket,

lampholder and lamp support. The design

objectives included being smaller than the T5

luminaire applications possible at present,

while achieving comparable or better

operational parameters and a clear stylistic

design. At just 37 mm wide, the Linear Flat

System is positively predestined for use in

lighting channels.

The Linear Flat System consists of an

extruded aluminium proﬁle with an LED

board inserted and a diffusing PMMA cover.

Clicked into the pre-assembled lampholders,

with this solution, several LED applications

can be realised in a very simple manner.

Main advantage: Luminaire manufacturers

can continue to work with familiar assembly

technologies because, unlike production

methods for conventional LED solutions, no

ESD-protected work area is required. The

luminaire can be wired automatically and the

light source can be installed at a later stage.

This so called „Late Stage Finishing“ reduces

storage costs on one hand and enables on

the other hand upgrades, which with already

installed LEDs is only possible with high

operational expenses.

Users beneﬁt from the long operating life

and ease with which the light source can be

replaced. The Linear Flat System is suitable

for different lighting requirements, for

example in shop lighting applications with

varying ranges of goods. It also meets the

demands of designers who require delicate,

uncomplicated components.

Late Stage Finishing

Low-proﬁle design

Can be upgraded

Easy replacement of light

source

BJB///Tops

041