BF14U2-7512
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-206
PRODUCT BRIEF
Dual-DVI Copper to Fiber Media Converter,
28VDC
D38999 (ARINC801 for Fiber Optic),
D38999 (Quadrax & Pin contacts for Signal and Service Port),
D38999 (Pin contacts for Power)
REV
DESCRIPTION
DATE
APPROVED
A
Released
11/7/2016
MT/MF/GC
B
Corrected color assignment of TMDS channel 1 and 2 on J1 Pinout Table DCN#: 62709
11/14/2016
MT/AP
C
Update pinout of TMDS pairs per DCN 62900
11/30/2016
AP/MT
©2016 Glenair, Inc. REV: C US Cage Code 06324 Printed in USA
GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com PAGE 2 of 12 E-mail: sales@glenair.com
050-206 PRODUCT BRIEF
Dual-DVI Copper to Fiber Media Converter
D38999 (Signal, BIT), D38999 (Power), D38999 (Fiber Optic)
Dual-DVI Copper to Fiber Media Converter
The Glenair 050-206 Dual - Digital Visual Interface (DVI) Copper to Fiber Optic
Media Converter increases DVI operational link distance in harsh environments. It
allows both longer distance and more reliable communication on optical fibers in
ruggedized systems using DVI protocol between graphics cards and remote
displays. This media converter is configured as either transmitter, converting
electrical DVI signals to fiber, or as a receiver, converting fiber optic signals into
the electrical DVI signals. The media converter incorporates a power supply which
has been designed to accept a wide DC input voltage range, 18V to 36V. The 050-
206 is designed for harsh environments and incorporates electronics in an
environmentally sealed enclosure that incorporates three environmental D38999
connectors. Signal I/O and BIT functionality is supplied through one D38999
connector and power is provide through its own dedicated D38999 connector. The
Fiber Optics passes through D38999 using ARINC 801 contact which can be
configured to support either single mode or multi-mode fiber applications.
OPTIONAL FEATURES
Built In Test Console Port accessible via USB2.0
Built in Test Console Port accessible via UART
(RS422)
APPLICATIONS
Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications
DVI EDID and hot-plug detection are not supported