(800) TMS-COAX • www.timesmicrowave.com
10
TIMES MICROWAVE SYSTEMS
LMR
®
100A Flexible Low Loss Communications
Coax
LMR-100A
Ideal for…
• Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
��� Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
Par t Description
Stock
Part Number Application Jacket Color Code
LMR-100A-FR Indoor/Outdoor-FR FRPE Black 54037
LMR-100A-PVC Indoor/Outdoor PVC Black 54119
LMR-100A-PVC-W Indoor/Outdoor PVC White 54200
LMR-100A-UF Indoor TPE Black 54274
LMR-100-PUR Indoor PUR Black 54363
PVC = Poly Vinyl Chloride
Construction Specications
Description Material In. (mm)
Inner Conductor Solid BCCS 0.018 (0.46)
Dielectric Solid PE 0.060 (1.52)
Outer Conductor Aluminum Tape 0.065 (1.65)
Overall Braid Tinned Copper 0.083 (2.11)
Jacket See Table 0.110 (2.79)
Attenuation vs. Fr equency (typical)
Attenuation
(db per 100 feet)
100
10
1
10 100 1,000 10,000
Frequency (MHz)
Calculate Attenuation = (0.709140) • FMHz + (0.001740) • FMHz (interactive calculator available at http://www.timesmicrowave/telecom)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 80000
Attenuation dB/100 ft 3.9 5.1 8.9 10.9 15.8 22.8 30.1 33.2 35.2 39.8 64.1 77.3
Attenuation dB/100 m 12.9 16.7 29.4 35.8 51.9 74.9 98.7 109.0 115.5 130.6 210.3 253.8
Avg. Power kW 0.230 0.180 0.100 0.083 0.057 0.039 0.029 0.027 0.025 0.022 0.013 0.01
(800) TMS-COAX • www.timesmicrowave.com
11
TIMES MICROWAVE SYSTEMS
LMR-100A
Electrical Specications
Performance Property Units US (metric)
Velocity of Propagation % 66
Dielectric Constant NA 2.30
Time Delay nS/ft (nS/m) 1.54 (5.05)
Impedance ohms 50
Capacitance pF/ft (pF/m) 30.8 (101.1)
Inductance uH/ft (uH/m) 0.077 (0.25)
Shielding Effectiveness dB >90
DC Resistance
Inner Conductor ohms/1000ft (/km) 81.0 (266)
Outer Conductor ohms/1000ft (/km) 9.5 (31.2)
Voltage Withstand Volts DC 500
Jacket Spark Volts RMS 2000
Peak Power kW 0.6
Environmental Specications
Performance Property
0
F
o
C
Installation Temperature Range -40/+185 -40/+85
Storage Temperature Range -94/+185 -70/+85
Operating Temperature Range -40/+185 -40/+85
Connectors
Inner Outer Finish*
Part Stock VSWR ** Coupling Contact Contact Body Length Width Weight
Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
1. SMA Male Straight Plug TC-100-SM 3190-1551 <1.25:1 (3) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
2. TNC Male Straight Plug TC-100-TM 3190-1552 <1.25:1 (3) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)
3. N Female Straight Jack TC-100-NF 3190-3030 <1.25:1 (3) N/A Solder Crimp A/G 1.3 (32.4) 0.62 (15.8) 0.055 (25.0)
4. N Male Straight Plug TC-100-NM 3190-3029 <1.25:1 (3) Hex Solder Crimp A/G 1.1 (28.2) 0.9 (22.6) 0.066 (30.0)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
Mechanical Specications
Performance Property Units US (metric)
Bend Radius: installation in. (mm) 0.25 (6.4)
Bend Radius: repeated in. (mm) 1 (25.4)
Bending Moment ft-lb (N-m) 0.1 (0.014)
Weight lb/ft (kg/m) 0.0092 (.014)
Tensile Strength lb (kg) 15 (6.8)
Flat Plate Crush lb/in. (kg/mm) 10 (0.18)
CCT-02
3192-165
Install Tools
Type Part Number Stock Code Description
Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200
and 240 connectors
Cutting Tool CCT-02 3192-165 Cable end ush cut tool
Replacement Blade RB-02 3192-166 Replacement blade for cutting tool
TC-100-SM
3190-1551
TC-100-TM
3190-1552
TC-100-NF
3190-3030
TC-100-NM
3190-3029
1
2
3 4
CT-240/200/195/100 - 3190-667