MIE10-HI SERIES
DC-DC CONVERTER 10W, Ultra-High Isolation, DIP-Package
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2019/06/18 REV:0 Page 1 of 67
®
►Industrial Standard DIP-24 Package
►Wide 2:1 Input Voltage Range
►Fully Regulated Output Voltage
►Ultra-high I/O Isolation 9000VDC with reinforced I nsulation, rate for
1000Vrms Working Voltage
►Common Mode Transient Immunity: 15kV/μS
►Operating Am bient Temp. Range -40℃ to +90℃
►No Min. Load Requirem ent
►Under-voltage, Overload/Voltage and Short Circuit Prote ction
►EMI Emission EN 55032 Class A & FCC Level A Approved
►UL/cUL/IEC/EN 62368-1 Safety Approval & CE Marking
The MINMAX MIE10-HI series is a new range of high performance 10W dc-dc converter within encapsulated DIP-24 package which specifically design for
high isolation applications where reinforced insulation and high working voltage are required. There are 24 models available for input voltage of 12, 24,
48VDC with wide 2:1 input range and tight output voltage. The I/O isolation is specified for 9000VDC with reinforced insulation, which rated for 1000Vrms
working voltage. Further features include under-voltage, overload, short circuit protection, no min. load requirement, EMI emission EN55032 Class A
approved, low I/O capacitance 20pF max. and operating ambient temp. range by -40°C to 90°C by high efficiency up to 88%. MIE10-HI series conform to
common mode transient immunity testing by 15kV/μS and UL/cUL/IEC/EN 62368-1 safety approvals.
The MIE10-HI series offer a superior solution for critical application in requesting a certified supplementary and high I/O isolation with reinforced insulation
system to comply with 1000Vrms working voltage.
Model Number
Input
Voltage
Output
Voltage
Output
Input Current
Voltage
Protection
Max. capacitive
Load
Efficiency
12
(9 ~ 18)
12
24
(18 ~ 36)
8
48
(36 ~ 75)
6
# For each out put