6 General Characteristics
7 Electrical CharacteristicsTA =25°C
Notes: Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method.
Model Package Size
0603-2 1.60 mm × 0.80 mm × 0.30 mm
Parameter Value Unit
Contact Discharge Voltage Per IEC61000-4-2 8 KV
Air Discharge Voltage Per IEC61000-4-2 15 KV
Operating Temperature -55 to +125
Storage Temperature -40 to +85
Parameter Symbol Conditions Min. Typ. Max. Units
Continuous Operating Voltage V
DC
---
--- --- 24 V
Trigger Voltage V
T
IEC61000-4-2 8KV
contact discharge
--- 450 --- V
Clamping Voltage V
C
IEC61000-4-2 8KV
contact discharge
--- 40 --- V
Leakage Current I
L
DC 24V shall be applied
on component
--- --- 10 nA
Capacitance C
P
Measured at 10MHz
--- 0.05 --- pF
ESD Pulse Withstand Pulses
IEC61000-4-2 8KV
contact discharge
1000 --- --- ---
1 Feature
Ultra-low capacitance:0.05pF(Typ.)
Low leakage current(<10nA)
Fast response time(<1ns)
IEC61000-4-2(Contact) : 8KV
IEC61000-4-2(Air) : 15KV
Bi-directional, single line protection
2 Description
PESD0603MS24 polymeric ESD suppressor
help protect sensitive electronic equipment
against electrostatic discharge (ESD) without
distorting data signals. This protection is a
result of its ultra-low capacitance of only 0.05
pF (I/O to GND), and it can be used to help
equipment to pass IEC61000-4-2 level 4 test
(15KV air, 8KV contact discharge).
3 Application
Smart phone/Mobile internet device
Laptop/Desktop computer
Antennas (Cell Phones, GPS…)
USB 3.0, USB 3.1 and high speed interface
4 Device Information
5
Pin Descripti
on
PESD2463U005
ESD Protection Diode in 0603
PESD2463U005
Rev : www.leiditech.com
01.06.2017
1/7
8 Typical ESD ResponseIEC 61000-4-2, 8KV contact discharge
9 Typical ESD ResponseIEC 61000-4-2, 8KV contact discharge
10 Typical Device Capacitance VS. Frequency
-50
0
50
100
150
200
250
300
350
400
450
0 10 20 30 40 50 60 70 80 90
Voltage ( V )
Timens
0
0.01
0.02
0.03
0.04
0.05
0.06
1.0E+07 1.0E+08 1.0E+09 1.0E+10
Capacitance(pF
)
Frequency(Hz)
PESD2463U005
Rev : www.leiditech.com
01.06.2017
2/7