STE
www.vishay.com
Vishay
Revision: 20-Feb-2019
1
Document Number: 43009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SuperTan
®
Extended (STE) Capacitors,
Wet Tantalum Capacitors with Hermetic Seal
FEATURES
Vishay SuperTan
®
Extended (STE) represents a
major breakthrough in wet tantalum capacitor
technology. Its unique cathode system, also used
in the ST, provides the highest capacitance per
unit volume available. The STE combines the
inherent reliability of wet tantalum with the capacitance
stability of solid tantalum, and there are no circuit
impedance restrictions. The range is exceptionally well
suited for low voltage filtering and energy storage
applications. Ideal for designs targeting the military and
aerospace industry.
The SuperTan
®
Extended (STE) is housed in an all tantalum,
hermetically sealed case and is manufactured to withstand
high stress and hazardous environments.
•
Axial through-hole terminations: standard tin / lead (Sn / Pb),
100 % tin (RoHS-compliant) available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 % available as special.
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings tables.
Life Test: capacitors are capable of withstanding a 2000 h
life test at a temperature of +85 °C at the applicable rated
DC working voltage.
Note
• Packaging: the use of formed plastic trays for packaging this type of axial lead component is standard.
Tape and reel is not recommended due to the unit weight.
Available
Available
ORDERING INFORMATION
STE 6000 16 T4 M I E3
TYPE CAPACITANCE
µF
DC VOLTAGE RATING
AT +85 °C
CASE SIZE CAPACITANCE
TOLERANCE
INSULATING
SLEEVE
RoHS COMPLIANT
M = ± 20 %
K = ± 10 %
I = insulated
X = uninsulated
E3 = 100 % tin termination
(RoHS compliant)
Blank = SnPb termination
(standard design)
STE
www.vishay.com
Vishay
Revision: 20-Feb-2019
2
Document Number: 43009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Material at egress is tantalum
• Insulation sleeving will lap over the ends of the capacitor case
• Approx. weight:
T1: 2.3 g, T2: 5.7 g
T3: 9.4 g, T4: 14.8 g
DIMENSIONS in inches [millimeters]
CASE CODE D ± 0.016 [0.41]
MAX. INSULATED
(DIA.)
L
1
+ 0.031 / - 0.016 [+ 0.79 / - 0.41]
UNINSULATED
E ± 0.250 [6.35] MAX.
T1 0.188 [4.78] 0.219 [5.56] 0.453 [11.51] 1.500 [38.10]
T2 0.281 [7.14] 0.312 [7.92] 0.641 [16.28] 2.250 [57.15]
T3 0.375 [9.52] 0.406 [10.31] 0.766 [19.46] 2.250 [57.15]
T4 0.375 [9.52] 0.406 [10.31] 1.062 [26.97] 2.250 [57.15]
“D” Dia.
Terminal Welded
to Case
0.250 (6.35)
Max.
0.094 (2.38)
Max.
EE
L
1
Terminal Location
within 0.031 of Center
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
STANDARD RATINGS
CAPACITANCE
(μF)
VOLTAGE
CASE
CODE
PART NUMBER
MAX.
ESR AT
+25 °C
120 Hz
(
)
TYP.
ESR AT
+25 °C
1 kHz
(
)
MAX. DCL AT
MAX. CAPACITANCE
CHANGE AT
MAX.
IMP. AT
-55 °C
120 Hz
(
)
AC
RIPPLE
85 °C
40 kHz
mA
RMS
+25 °C
(μA)
+85 °C /
+125 °C
(μA)
-55 °C
(%)
+85 °C
(%)
+125 °C
(%)
10 V
DC
AT +85 °C; 7 V
DC
AT +125 °C
680 10 T1 Preliminary value, contact marketing
2000 10 T2 Preliminary value, contact marketing
4700 10 T3 STE4700-10T3MI 0.35 < 0.200 16 100 -80 10 20 3.50 4000
10 000 10 T4 STE10000-10T4MI 0.25 < 0.100 25 150 -85 20 35 3.00 5000
16 V
DC
AT +85 °C; 11 V
DC
AT +125 °C
430 16 T1 Preliminary value, contact marketing
1200 16 T2 Preliminary value, contact marketing
3300 16 T3 STE3300-16T3MI 0.35 < 0.200 16 100 -80 10 15 3.50 4000
6000 16 T4 STE6000-16T4MI 0.30 < 0.150 25 150 -80 15 20 3.00 4500
25 V
DC
AT +85 °C; 15 V
DC
AT +125 °C
270 25 T1 Preliminary value, contact marketing
1000 25 T2 Preliminary value, contact marketing
2200 25 T3 Preliminary value, contact marketing
4000 25 T4 STE4000-25T4MI 0.35 < 0.150 25 125 -80 15 20 5.00 4250
30 V
DC
AT +85 °C; 20 V
DC
AT +125 °C
220 30 T1 Preliminary value, contact marketing
820 30 T2 STE820-30T2MI 1.00 < 0.600 3.5 18 -75 12 20 20.00 1650
1800 30 T3 Preliminary value, contact marketing
3300 30 T4 STE3300-30T4MI 0.35 < 0.200 25 125 -80 20 25 4.00 2750
35 V
DC
AT +85 °C; 22 V
DC
AT +125 °C
180 35 T1 Preliminary value, contact marketing
680 35 T2 STE680-35T2MI 0.95 < 0.500 5 25 -75 16 20 16.00 2500
1500 35 T3 Preliminary value, contact marketing
2800 35 T4 STE2800-35T4MI 0.35 < 0.200 25 125 -80 20 30 4.50 4000