Synchronous Ethernet (SyncE) Selector Guide
Timing Card
Part Description DPLLs
BW
(Hz)
Inputs
Input
Frequency
Embedded
PPS
& EPP2S
Diff.
Outputs
CMOS
Outputs
Output
Frequency
Low-
Jitter
APLLs
GP
Clock
Gen
Jitter
(ps
RMS
)
Pkg
size
(mm)
ZL30142 Single Ch SyncE DPLL - 1GbE 1 0.1m–890 3 SE 2k, N x 8K, SDH, SyncE 1 2 2K, N x 8K, SDH, SyncE 1 1 1.0 9 x 9
ZL30143 Dual Ch SyncE DPLL - 1GbE 2 0.1m–890 8 SE 2k, N x 8K, SDH, SyncE 2 6 2K, N x 8K, SDH, SyncE 1 2 1.0 9 x 9
ZL30161 Any-Freq. Single Ch SyncE PLL/NCO - 1GbE/10GbE 1 or (1 NCO) 0.1m–1k 11 1Hz–750MHz 6 6 1Hz–750MHz 3 0 0.67 13 x 13
ZL30162 Any-Freq. Quad Ch SyncE PLL/NCO - 1GbE/10GbE 4 or (4 NCO) 0.1m–1k 11 1Hz–750MHz 8 8 1Hz–750MHz 4 0 0.67 13 x 13
ZL30163 Any-Freq. Dual Ch SyncE PLL/NCO - 1GbE/10GbE 2 or (2 NCO) 0.1m–1k 11 1Hz–750MHz 8 8 1Hz–750MHz 4 0 0.67 13 x 13
ZL30164 Any-Freq. Triple Ch SyncE PLL/NCO - 1GbE/10GbE 3 or (3 NCO) 0.1m–1k 11 1Hz–750MHz 8 8 1Hz–750MHz 4 0 0.67 13 x 13
ZL30621 Single Ch SyncE PLL/NCO Small Footprint - 10GbE * 1 or (1 NCO) 0.1m–10 2 D/SE + 1 SE 8kHz–1250MHz 3 6 <1Hz–1035MHz 1 0 0.26 5 x 10
ZL30622 Single Ch SyncE PLL/NCO Small Footprint - 10GbE 1 or (1NCO) 0.1m–500 2 D/SE + 1 SE 8kHz–1250MHz 3 6 <1Hz–1035MHz 1 0 0.26 5 x 5
ZL30623 Dual Ch SyncE PLL/NCO Small Footprint - 10GbE 2 or (2 NCO) 0.1m–500 4 D/SE + 1 SE 8kHz–1250MHz 6 12 <1Hz–1035MHz 2 0 0.26 5 x 10
ZL30601
Any-Freq. Single Ch SyncE PLL/NCO -
10GbE/40GbE/100GbE
1 or (1 NCO) 0.1m–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz 2 or 3 1 0.19 10 x 10
ZL30602
Any-Freq. Dual Ch SyncE PLL/NCO -
10GbE/40GbE/100GbE
2 or (2 NCO) 0.1m–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz 2 or 3 1 0.19 10 x 10
ZL30603
Any-Freq. Triple Ch SyncE PLL/NCO -
10GbE/40GbE/100GbE
3 or (3 NCO) 0.1m–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz 2 or 3 1 0.19 10 x 10
ZL30604
Any-Freq. Quad Ch SyncE PLL/NCO -
10GbE/40GbE/100GbE
4 or (4 NCO) 0.1m–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz 2 or 3 1 0.19 10 x 10
ZL30671
Any-Freq. Single Ch SyncE Timing Card PLL/NCO
10GbE/40GbE/100GbE 5G CU, DU, and RU systems
1 or (1 NCO) 0.1m-470 10 D/10 SE 0.5 Hz-900 MHz 8 16 + 2 0.5 Hz-1045 MHz 2 1 0.19 11x11
ZL30672
Any-Freq. Dual Ch SyncE Timing Card PLL/NCO
10GbE/40GbE/100GbE 5G CU, DU, and RU systems
2 or (2 NCO) 0.1m-470 10 D/10 SE 0.5 Hz-900 MHz 8 16 + 2 0.5 Hz-1045 MHz 2 1 0.19 11x11
ZL30673
Any-Freq. Triple Ch SyncE Timing Card PLL/NCO
10GbE/40GbE/100GbE 5G CU, DU, and RU systems
3 or (3 NCO) 0.1m-470 10 D/10 SE 0.5 Hz-900 MHz 8 16 + 2 0.5 Hz-1045 MHz 2 1 0.19 11x11
* Low-jitter operation from any 10MHz TCXO
Abbreviations:
D= Differential. SE= Single-ended. GP= General purpose. NCO= Numerically controlled oscillator. ToP= Timing over packet. SyncE= Synchronous Ethernet. SS= SONET/SDH. FC= Frequency conversion/T4 DPLL.
Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications,
data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and
synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions,
security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever
arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical
equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or
installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to
test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant,
explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to
Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
©2018 Microsemi, a wholly owned subsidiary of Microchip Technology Inc. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are
the property of their respective owners.
Microsemi Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
SyncE. 1.2. 8/18
Synchronous Ethernet (SyncE) Selector Guide
Line Card
Part Description DPLLs
BW
(Hz)
Inputs
Input
Frequency
Embedded
PPS
& EPP2S
Diff.
Outputs
CMOS
Outputs
Output
Frequency
Input Sync
Pulses for
Alignment
Low-
jitter
APLLs
GP
Clock
Gen
Jitter
(ps
RMS
)
Pkg
size
(mm)
ZL30151 Single Ch SyncE PLL/NCO Small Footprint - 10GbE 1 1–500 2 D/SE + 1 SE 1kHz–650MHz 0–3 0–6 <1Hz–650MHz 1 0 0.26 5 x 5
ZL30160 Any-Freq Quad Ch SyncE PLL / NCO - 1GbE 4 14–896 4 D/SE 1kHz–750MHz 8 4–12 1kHz–750MHz 2 2 0.7 11 x 11
ZL30165 Any-Freq Quad Ch SyncE PLL / NCO - 1GbE/10GbE 4 or (4 NCO) 5–896 8 D/SE 1kHz–750MHz 8 8 1kHz–750MHz From 1Hz 4 0 0.67 13 x 13
ZL30166 Any-Freq Triple Ch SyncE PLL / NCO - 1GbE/10GbE 3 or (3 NCO) 5–896 9 D/SE + 2 SE 1kHz–750MHz 8 8 1kHz–750MHz From 1Hz 4 0 0.67 13 x 13
ZL30167 Any-Freq Dual Ch SyncE PLL / NCO - 1GbE/10GbE 2 or (2 NCO) 5–896 9 D/SE + 2 SE 1kHz–750MHz 8 8 1kHz–750MHz From 1Hz 4 0 0.67 13 x 13
ZL30611 Any-Freq Single Ch SyncE PLL / NCO - 10GbE/100GbE 1 or (1 NCO) 14–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz From 0.5Hz 2 or 3 1 0.19 10 x 10
ZL30612 Any-Freq Dual Ch SyncE PLL / NCO - 10GbE/100GbE 2 or (2 NCO) 14–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz From 0.5Hz 2 or 3 1 0.19 10 x 10
ZL30614 Any-Freq Quad Ch SyncE PLL / NCO - 10GbE/100GbE 4 or (4 NCO) 14–470 5 D/10 SE 0.5Hz–900MHz 6 14 0.5Hz–900MHz From 0.5Hz 2 or 3 1 0.19 10 x 10
ZL30681
Any-Freq Single Ch SyncE PLL / NCO -
10GbE/40GbE/
100GbE 5G CU, DU, and RU systems
1 or (1 NCO) 14-470 10 D/10 SE 0.5Hz–900MHz 8 16 + 2 0.5Hz–1045MHz From 0.5 Hz 2 1 0.19 11x11
ZL30682
Any-Freq Dual Ch SyncE PLL / NCO -
10GbE/40GbE/
100GbE 5G CU, DU, and RU systems
2 or (2 NCO) 14-470 10 D/10 SE 0.5Hz–900MHz 8 16 + 2 0.5Hz–1045MHz From 0.5 Hz 2 1 0.19 11x11
ZL30683
Any-Freq Triple Ch SyncE PLL / NCO -
10GbE/40GbE/
100GbE 5G CU, DU, and RU systems
3 or (3 NCO) 14-470 10 D/10 SE 0.5Hz–900MHz 8 16 + 2 0.5Hz–1045MHz From 0.5 Hz 2 1 0.19 11x11
Abbreviations:
D= Differential. SE= Single-ended. GP= General purpose. NCO= Numerically controlled oscillator. ToP= Timing over packet. SyncE= Synchronous Ethernet. SS= SONET/SDH. FC= Frequency conversion/T4 DPLL.