Canada: 1-800-387-6487 www.burndy.com US: 1-800-346-4175
BURNDY
®
Cable Ties
TABLE OF CONTENTS
Reference / Technical Information
Material Information
Available Materials
Material Specications
Material Performance Guide
Catalog Numbering Schema
Military Specication Information
Precision Engineering, Enhanced Performance
Product Specic Information
Nylon 6/6
Standard Cable Ties
Identication Cable Ties
Push Mount Cable Ties
Releasable Cable Ties
Mounting Hole Cable Ties
Heat Stabilized Cable Ties
Cable Tie Mounting Bases
Cable Hangers
Stainless Steel Barb Cable Ties
Universal Grade Cable Ties
Universal Grade Mounting Hole Cable Ties
Universal Grade Mounting Bases
Cable Tie Variety Canisters
Velcro
®
Hook & Loop Straps
304 Stainless Steel Cable Ties
Uncoated
Partially Coated
Fully Coated
316 Stainless Steel Cable Ties
Uncoated
Partially Coated
Fully Coated
Wiley Bundle Strap
Cable Tie Installation Tools
G-1
G-2
G-2
G-2
G-3
G-3
G-4
G-5
G-6
G-10
G-10
G-11
G-12
G-13
G-14
G-15
G-16
G-18
G-20
G-21
G-22
G-23
G-24
G-25
G-26
G-27
G-28
G-29
G-30
G-31
US: 1-800-346-4175 www.burndy.com Canada: 1-800-387-6487
BURNDY
®
Cable Ties
Available Materials
Nylon 6/6 — General Purpose
General purpose nylon 6/6 features light weight,
high strength and a wide temperature range. It
is halogen free so it does not release dangerous
gases, such as chlorine, bromine, uorine and
iodine when burned. Nylon 6/6 is hydroscopic, and
therefore, absorbs or releases moisture depending
on its environment. Thus, the moisture level of the
material will affect tensile strength, stiffness and
elongation of the product.
Nylon 6/6 — Heat Stabilized
With similar properties and benets as nylon 6/6,
products manufactured with heat stabilized nylon
6/6 material have a chemical stabilizer added for
higher continuous temperature applications.
Nylon 6/6 — UV Stabilized
Chemical inhibitors are used to give nylon
6/6 material added properties to ght against
premature aging of products due to the effects of
ultraviolet rays.
Nylon 6/6 — UV Stabilized
(2% Carbon for Military Specication)
The physical properties of this material include
carbon, which acts as a UV stabilizer, prolonging
the life of the product under ultraviolet conditions.
It also allows cable ties to meet the particular
military specication for cable ties.
Nylon 6/6 — V0 Flame Retardant
This material meets UL 94V-0 ammability
requirements. Flame retardant additives
generally reduce tensile strength when
compared to general-purpose nylon 6/6, but
this resin has been formulated to minimize such
effects.
Nylon 6/6 — High Impact
Impact modiers are added to increase exibility.
High impact nylon 6/6 has stable tensile strength
due to its reduced inuence from moisture. It
is excellent for high vibration applications, as
within the aircraft and automobile industries and
performs better than nylon 6/6 against ultraviolet
rays. Good for outdoor use.
Material
Continuous*
Operating
Temperature
Max. Min.
Tensile Strength
at 73° F Dry as
Molded
ASTM D-638 (PSI)
UL
Flame
Rating
Oxygen
Index %
Gamma
Radiation
Resistance
UV
Resistance
Military, Federal, ASTM,
and FDA Specications
Nylon 6/6 —
General Purpose (CT)
185° F –40° F
85° C –40° C
12,000 94V-2 28 1 x 10
5
Rads Poor
ASTM D-4066PA0111
FDA CFR177.1500
Nylon 6/6 —
Heat Stabilized (CTHS)
220° F –40° F
105° C –40° C
12,000 94V-2 26 1 x 10
5
Rads Poor ASTM D-4066PA0121
Nylon 6/6 —
UV Stabilized (O)
185° F –40° F
85° C –40° C
12,000 94V-2 26 1 x 10
5
Rads Good ASTM D4066PA0191
Nylon 6/6 — 2% Carbon
UV Stabilized (OO)
220° F –40° F
105° C –40° C
12,000 94V-2 26 1 x 10
5
Rads Good
ASTM D-4066PA0181
MS3367/8
Nylon 6/6 —
Flame Retardant (CTV)
185° F –40° F
85° C –40° C
10,800 94V-0 34 1 x 10
5
Rads Poor ASTM D-4066PA0110
Nylon 6/6 —
High Impact
185° F –40° F
85° C –40° C
8,800 94-HB 19 1 x 10
5
Rads Good ASTM D-4066PA0150
Polypropylene —
Chemical Resistant (CTPP)
185° F –40° F
85° C –40° C
3,400 94-HB N/A 1 x 10
5
Rads Good
ASTM D-4101PP0320
FDA CFR177.1520
Nylon 12 —
UV Stabilized
176° F –40° F
80° C –40° C
5,800 94-HB N/A 9 x 10
6
Rads Good ASTM D-4066PA411
* Elevated temperatures, over time, will affect materials’
properties such as tensile strength, stiffness, elongation
and appearance.
BURNDY
®
recommends the evaluation of cable ties in the
actual application to determine the suitability of the tie for that
application.
Material Specications
Material Information
Polypropylene
Polypropylene is used in environments where
chemical effects on nylon are a concern. It is
not affected by inorganic acids (hydrochloric),
polyhydric alcohols (ethyleneglycol), neutral
salts (sodium chloride) and basic salts (sodium
bicarbonate). Polypropylene also resists a
number of other chemicals with good results,
although it has lower tensile strength than nylon
6/6 (about half). Polypropylene has good UV
resistance.
Nylon 12 — UV Stabilized
Nylon 12 is resistant to chemicals and salts.
Ideal for solar applications. Weather resistant
grade, produced by the addition of stabilizers to
the nylon resin.
Stainless Steel
Stainless Steel is used where corrosion,
vibration, weathering, and temperature
extremes are a concern. May be used for
virtually any indoor, outdoor, or underground
application. Available in both 304 and 316
Stainless Steel. Also available partially or fully
coated with polyester.
G-2