HEADQUARTERS

81 Koizumi, Ueda, Nagano, 386-1192, Japan

TEL +81-268-28-0562 FAX +81-268-28-0568

http://www.hioki.com / E-mail: os-com@hioki.co.jp

HIOKI USA CORPORATION

TEL +1-609-409-9109 FAX +1-609-409-9108

http://www.hiokiusa.com / E-mail: hioki@hiokiusa.com

All information correct as of Sept. 18, 2015. All specications are subject to change without notice. info_U8793E1-59M Printed in Japan

DISTRIBUTED BY

HIOKI (Shanghai) SALES & TRADING CO., LTD.

TEL +86-21-63910090 FAX +86-21-63910360

http://www.hioki.cn / E-mail: info@hioki.com.cn

HIOKI INDIA PRIVATE LIMITED

TEL +91-124-6590210

E-mail: hioki@hioki.in

HIOKI SINGAPORE PTE. LTD.

TEL +65-6634-7677 FAX +65-6634-7477

E-mail: info-sg@hioki.com.sg

HIOKI KOREA CO., LTD.

TEL +82-2-2183-8847 FAX +82-2-2183-3360

E-mail: info-kr@hioki.co.jp

Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies.

Maximum output voltage

-10 V to 15 V

Amplitude setting range

0 V to 20 V p-p (setting resolution: 1 mV)

DC offset setting range

-10 V to 15 V

Output impedance

1 Ω or less

Maximum output current

±10 mA (per channel)

Output type

Waveform output, open, shorted

Analog Output Specications

(applicable to both custom waveform generation and function generation mode)

Output waveforms

Sine, square, pulse (variable duty), triangle, ramp, DC

Output frequency range

10 mHz to 100 kHz (setting resolution: 10 mHz)

Function Generator Mode

Output waveforms

Waveforms measured with the Memory HiCorder

MR8847, MR8847A, MR8827, MR8740, and MR8741

Waveforms created with Waveform Creation

Software SF8000

Waveforms saved by the Arbitrary Waveform

Generator 7075

Power Quality Analyzer PW3198 and power meter

waveforms

Waveforms created as CSV-format les

*Logic waveforms are not supported.

Voltage axis resolution

16 bits

Waveform memory capacity

256 kW/ch. × 8 blocks

Low-pass lter

2-stage LPF, 50 Hz to 1 MHz

(14 steps in 1-2-5 progression)

D/A refresh rate

Up to 2 MHz (from 0 to 2 MHz, 10 mHz resolution)

Delay

-250.000 to 250.000

Number of loops

∞, 1 to 50,000

Arbitrary Waveform Generation

Channel synchronization

Set phase between unit channels or between units

Sweep functions

Frequency sweep, amplitude sweep, offset sweep

(can be set simultaneously),

duty sweep (during pulse output)

*Up and down sweep operation is supported.

(Target: Non-DC function generation waveforms and

custom waveforms)

Program functions

Sequence length: Max. 128 steps

(Hold on/off can be set by step.)

Number of step loops: 1 to 1,000

Number of overall loops: 1 to 50,000 or ∞

Other Specications

Number of output

channels

2 channels per unit

Output format

Unbalanced output (oating)

Output terminal

SMB terminal

Dimensions and mass

Approx. 106 (W) × 19.8 (H) × 196.5 (D) mm, approx. 250 g

Accessory

User manual

General Specications

Output recorded waveforms without modication

Arbitrary Waveform Generator Unit U8793

Available soon

After

Generate signals of up to

15 V without an amplier.

With Arbitrary Waveform Generator

Unit installed

By combining a Memory HiCorder and the Arbitrary Waveform Generator Unit, you can output actual

waveforms captured from a test vehicle without modication for later use in standalone testing.

Furthermore, the U8793 can generate isolated output of up to 15 V without a generator or amplier, which

is traditionally necessary in order to generate output while varying the signal’s amplitude and frequency.

Example applications

(testing of electronic control boards for automobiles)

Record

Generate

Arbitrary

Waveform Generator

Amplier

Record vehicle data

Output

recorded waveforms

Before

Standalone testing

Electronic control board