SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
18
SERIES Y-LPF
Y-LOCK PULLFORCE VERSION 2 CONNECTOR 180° (1.00MM PITCH) SMT
SPECIFICATIONS
Insulation Resistance: 1,000M min. at 100V DC
Withstanding Voltage: 250V AC for 1 minute
Contact Resistance: 50m max. at 10mA
Current Rating: 0.5A
Voltage Rating: 50V DC
Operating Temp. Range: –40°C to +105°C
Mating Cycles: 10 times minimum
MATERIALS AND FINISH
Housing: LCP (UL94V-0)
Contacts: Copper Alloy
Plating: Mating Area - 15µ" Au
Solder Area - Au Flash
Under Plating - Ni
FEATURES
• NON-ZIF connector
• One push-lock system, insertion: push-lock, extraction: pullforce
• Usage with FFC with additional locking stiffener, please see next page
• Developed and tested for automotive and other rough applications
• Produced in a TS16949 production site
• RoHS2011/65/EU
PART NUMBER
Series No.
Connector
Pitch: 5 = 0.50mm
Pin Count: 18 (only)
Terminal Style: S = SMT
Orientation: 1 = 180°
Plating: Mating / Termination Area
BF = 0.3µm Au / Flash Au
Tape and Reel (180° version with Pick & Place Cap)
Y-LPF - 2C 5 - 18 - S 1 - BF - REDC
RECOMENDED PCB LAYOUT
For matching cable see next page
AUTOMOTIVE
COMPLIANT
OUTLINE DIMENSIONS