SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
21
SERIES Y-LPF
Y-LOCK PULLFORCE LOCKING CABLE SYSTEM (0.50MM PITCH)
OUTLINE DIMENSIONS
SPECIFICATIONS
Insulation Resistance: 1,000M min. at 500V DC
Withstanding Voltage: 250V AC for 1 minute
Contact Resistance 30 typical, 50
Current Rating: 0.5A max, 0.3A max. at 105°C
Voltage Rating: 50V DC
Operating Temp. Range: -40°C to +105°C (UL20706)
Mating Cylcles: 10 times
MATERIALS AND FINISH
Insulator: LCP
Contacts: Phosphor Bronze
Contact Plating: Mating area - min 1.0µm NI
Solder area - min 0.5µm Au Flash Au
Solder Terminals: Brass
Plating - min 2.5µm SN over Ni
FEATURES
• Acc. to UL20706
• Length and direction of contact area according to customer requirements
• Assembled stiffener is included
• Developed and tested for automotive and other rough applications
• Produced in a TS16949 production site
• Samples available on request
• RoHS2011/65/EU
Y-LPF - 2F 5 - 50 - *** - * * - F
PART NUMBER
Series No.
F = FFC
Pitch: 5 = 0.5mm
Pin Counts: 50
Total Length in mm
Direction of Supporting Tape:
A = Same Side B = Opposite Side
Additional Sti��ener:
0 = One side (other mating design) 2 = Two Sides
Plating Area: F = Au Flash
Total Length in mm
(customer specific)
Y-LOCK PULLFORCE CONNECTOR / CABLE SYSTEM