SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
20
SERIES Y-LPF
Y-LOCK PULLFORCE VERSION 2 CONNECTOR 180° (0.50MM PITCH ) SMT
SPECIFICATIONS
Insulation Resistance: 1,000M min. at 100V DC
Withstanding Voltage: 250V AC for 1 minute
Contact Resistance: 50m max.
Current Rating: 0.5A
Voltage Rating: 50V DC
Operating Temp. Range: –40°C to +105°C
Mating Cycles: 10 times minimum
MATERIALS AND FINISH
Housing: LCP (UL 94V-0)
Contacts: Copper Alloy
Plating: Mating area -15µ" Au plating
Solder area - Au flash plating
Underplating - Ni
FEATURES
• NON-ZIF connector
• Poka Yoke system
• One push-lock system, insertion: push-lock, extraction: pullforce
• Usage with FFC with additional locking stiffener, please see next page
• Developed and tested for automotive and other rough applications
• Produced in a TS16949 production site
• RoHS2011/65/EU
PCB LAYOUT
OUTLINE DIMENSIONS
PART NUMBER
Series No.
Connector
Pitch: 5 = 0.50mm
Pin Count: 50 (other pin counts on request)
Terminal Style: S = SMT
Orientation: 1 = 180° (90° available on request)
Plating: Mating / Termination Area
BF = 0.3µm Au / Flash Au
Tape and Reel (800 pcs./reel)
For matching cable see next page
Y-LPF - 2C 5 - 50 - S 1 - BF - REDC
AUTOMOTIVE
COMPLIANT
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
21
SERIES Y-LPF
Y-LOCK PULLFORCE LOCKING CABLE SYSTEM (0.50MM PITCH)
OUTLINE DIMENSIONS
SPECIFICATIONS
Insulation Resistance: 1,000M min. at 500V DC
Withstanding Voltage: 250V AC for 1 minute
Contact Resistance 30 typical, 50
Current Rating: 0.5A max, 0.3A max. at 105°C
Voltage Rating: 50V DC
Operating Temp. Range: -40°C to +105°C (UL20706)
Mating Cylcles: 10 times
MATERIALS AND FINISH
Insulator: LCP
Contacts: Phosphor Bronze
Contact Plating: Mating area - min 1.0µm NI
Solder area - min 0.5µm Au Flash Au
Solder Terminals: Brass
Plating - min 2.5µm SN over Ni
FEATURES
• Acc. to UL20706
• Length and direction of contact area according to customer requirements
• Assembled stiffener is included
• Developed and tested for automotive and other rough applications
• Produced in a TS16949 production site
• Samples available on request
• RoHS2011/65/EU
Y-LPF - 2F 5 - 50 - *** - * * - F
PART NUMBER
Series No.
F = FFC
Pitch: 5 = 0.5mm
Pin Counts: 50
Total Length in mm
Direction of Supporting Tape:
A = Same Side B = Opposite Side
Additional Stiffener:
0 = One side (other mating design) 2 = Two Sides
Plating Area: F = Au Flash
Total Length in mm
(customer specific)
Y-LOCK PULLFORCE CONNECTOR / CABLE SYSTEM