44
01.19
D
Test specifications:
In accordance with IEC 60384-2
Test voltage: 1.6 U
r
, 2 sec.
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages
Reliability:
Operational life 300 000 hours (+125° C
permitted for 1000 hours max. distributed
over the entire operating life)
Failure rate 2 fit (0.5 x U
r
and 40) C)
Mechanical Tests
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec
2
in
accordance with IEC 60068-2-29
Packing
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
Capacitance range:
0.01 mF to 10 mF (E12-values on request)
Rated voltages:
50 VDC, 63 VDC, 100 VDC, 250 VDC,
400 VDC, 630 VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
U
r
= 50 VDC: –55+ C to +100+ C
U
r
63 VDC: –55+ C to +125+ C
Climatic test category:
55/100/21 in accordance with IEC
Insulation resistance at +20+ C:
U
r
U
test
C 0.33 mF 0.33 mF < C 10 mF
50 VDC 10 V
5 x 10
3
M¸ 1000 sec (M¸ x mF)
63 VDC 50 V
1 x 10
4
M¸ 1250 sec (M¸ x mF)
100 VDC 100 V
1.5 x 10
4
M¸ 3000 sec (M¸ x mF)
Measuring time: 1 min.
Dissipation factors at + 20) C: tan
d
at f C 0.1 mF 0.1 mF < C 1.0 mF C > 1.0 mF
1 kHz 8 x 10
-3
8 x 10
-3
10 x 10
-3
10 kHz 15 x 10
-3
15 x 10
-3
–
100 kHz 30 x 10
-3
– –
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
Pulse rise time V/msec
mF
max. operation/test
50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
0.01 ... 0.022 – 35/350 35/350 50/500 80/800 110/1100
0.033 ... 0.068 – 20/200 25/250 50/500 80/800 90/900
0.1 ... 0.47 10/100 15/150 20/200 50/500 80/800 –
0.68 ... 1.0 8/80 12/120 15/150 25/250 – –
1.5 ... 3.3 8/80 7.5/75 10/100 – – –
4.7 5/50 5/50 – – – –
6.8 3/30 3/30 – – – –
10 2.5/25 – – – – –
WIMA MKS 2
Metallized Polyester (PET) Capacitors in PCM 5 mm.
Capacitances from 0.01
mF to 10 mF. Rated Voltages from 50 VDC to 630 VDC.
Special Features Electrical Data
˜ High volume/capacitance ratio
˜ Self-healing
˜ AEC-Q200 qualified
˜ According to RoHS 2011/65/EU
Typical Applications
For general DC-applications e.g.
˜ By-pass
˜ Blocking
˜ Coupling and decoupling
˜ Timing
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Silver/White.