3469A 080917
701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com
Copyright © 2017 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product
identiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any
aliation with or endorsement by such respective owners.
Page 1
Project Name
Catalog No. Date
NXAVM SERIES
Audio Visual Interface Module
The NX Audio Visual Interface Module allows third party systems
to digitally interface with an NX distributed lighting control
system. A simple ASCII based command set is used to interface
with third party systems such as Audio Visual systems to send
commands to NX lighting controls as well as query status. The
NXAVM supports RS232 serial communications, providing control
and status for a single zone.
Product Features
Ordering Information
Dimensional Data
• Mounts to standard 4 /” junction box, Raco #257 or similar
(not supplied)
• Connects to and is powered by NX SmartPORT™ with CAT5 cable
• Class 2 device, self powered from SmartPORT connection
• DB9 connector for RS232 serial communication
• Simple ASCII based command set
ASCII Command Set
Set Group State set,group,[group_number],state,[state]<cr><lf>
Get Group State get,group,[group_number],state<cr><lf>
Set Group Level set,group,[group_number],level,[level],ramp,[ramp_rate]<cr><lf>
Get Group Level get,group,[group_number],level<cr><lf>
Activate a Preset Scene set,preset,[preset_number]<cr><lf>
Get Current Active Preset get,preset<cr><lf>
MODEL
NXAVM NX Audio Visual Interface Module
NXAVM
4.75” 4.25”
4.75”
2.75”
R .125”
Mounts to a standard 4 / square JBox