Double-Balanced Mixer
Rev. V2
M1H
1
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1
Features
LO and RF: 1.8 to 6.2 GHz
IF: DC to 2 GHZ
LO Drive +7 dBm (nominal)
High Isolation 35 dB (Typ.)
Guaranteed Specifications
1
Characteristics Test Conditions Min Typ. Max. Units
SSB Conversion Loss
And
SSB Noise Figure
fL & fR 1.8 to 4.2 GHz, fI 0.01 to 1 GHz
fL & fR 1.8 to 4.2 GHz, fI 0.01 to 2 GHz
fL & fR 1.8 to 6.2 GHz, fI 0.01 to 2 GHz
—
7.0 dB
8.5 dB
9.0 dB
8.5 dB
9.5 dB
10.0 dB
dB
Isolation
fL at R, fL 1.8 to 4.2 GHz
fL at I, fL 1.8 to 4.2 GHz
fL at R, fL 4.2 to 6.2 GHz
fL at I, fL 4.2 to 6.2 GHz
25 dB
15 dB
18 dB
15 dB
40 dB
25 dB
25 dB
20 dB
— dB
Conversion Compression
fR = 0 dBm
fL at +7 dB
— 1.0 dB — dB
Absolute Maximum Ratings
Weight 31 gram (1.1 oz) max.
Storage Temperature -65
o
C to +100
o
C
Operating Temperature -54
o
C to +100
o
C
Peak RF Input Power +17 dBm
Peak Input Current at 25
o
C 50 mA DC
Notes:
1. Measure in a 50-Ohm system with nominal LO drive and downconverter application only, unless otherwise specified. The I-Port frequency
range extends to DC for phase detection, pulse modulation, or attenuator applications, I-Port VSWR degrades from a 50-Ohm system at low
IF frequencies.
Double-Balanced Mixer
Rev. V2
M1H
2
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2
Typical Performance Curves at 25
o
C