Current Sensing
Amplifiers
Signal Conditioning
Amplifiers
Isolated
ADCs
ADCs References Isolation
Gate
Drivers
Interfaces Processors
Energy
Meters
Power
Management
AD628, AD629,
AD8210, AD8212,
AD8217, AD8218
ADA4091-2,
ADA4610-x OPx177,
AD8622, AD8624,
AD8275,
AD7400A,
AD7401A
AD7266,
AD7606,
AD7607,
AD7606-6,
AD7656-1
AD158x,
ADR34xx,
ADR421,
ADR50xx
ADuM121x, ADuM131x,
ADuM141x, ADuM347x,
ADuM5000, ADuM520x,
ADuM540x,
ADuM5230,
ADuM6132,
ADuM7234
ADM2587E,
ADM3053E,
ADM3251E,
ADM3485E
ADSP-BF50x,
ADSP-BF51x,
ADuC702x
ADE7878,
ADE7953,
ADE8155,
ADE8156
ADP125,
ADP1710,
ADP211x,
ADP230X
ADI Product Technologies for Renewable Energy
(
Solar PV Systems
)
• Amps/references
• Precision ADCs
• Current and voltage measurement ICs
• Processors—Blackfin
®
ADSP-BF50x and
ARM7-based processors
• Power management ICs
• Vibration sensors—MEMS and accelerometers
•
i
Coupler
®
isolators—integrated isolation with
USB and RS-485
Featured Products
Part Number Description Key Features Benefits
Amplifiers
AD8212 Current sense amp 6 V to >500 V common-mode range, adjustable gain, current output High common-mode input range
ADA4091-2 Operational amp
Single-supply operation: 3 V to 30 V and wide input voltage range, rail-to-rail output swing,
low supply current: 250 μA/amplifier, overvoltage protection
(
OVP
)
Wide input voltage range and
overvoltage protection
ADCs
AD7400A/
AD7401A
Isolated ∑-∆
modulator
Operates from a 5 V power supply and accepts a differential input signal of
±250 mV
(
±320 mV full scale
)
Isolated and differential input
AD7606/
AD7607
8-channel, 16-/14-bit
simultaneous ADC
True bipolar analog input ranges: ±10 V, ±5 V, single 5 V analog supply, 2.3 V to 5 V VDRIVE,
1 MΩ analog input impedance, analog input clamp protection
8-channel simultaneous sampling,
single 5 V supply
Processors
ADSP-BF506F Embedded ADC DSP
300 MHz/400 MHz Blackfin core, embedded 12-bit ADC and 4 MB flash,
6-pair PWM output and multi-interface
12-bit ADC and >300 MHz core
ADuC702x Microconverter
41 MHz ARM7 core and embedded 12-bit ADC, 3-pair PWM output, 32 kB or
64 kB flash
Embedded 12-bit ADC
Isolation
ADuM5000 Isolated dc-to-dc
iso
Power
®
integrated isolated dc-to-dc converter, up to 500 mW output power,
thermal overload protection
Isolated dc-to-dc
ADuM141x
Quad-channel
digital isolator
High data rate: dc to 90 Mbps
(
NRZ
)
, high common-mode transient immunity: >25 kV/μs,
low power operation and bidirectional communication
Long lifetime, easy to select
different direction
Interfaces
ADuM2587E
Isolated RS-485/
RS-422 transceiver
Half or full duplex, 500 kbps, 5 V or 3.3 V operation
Integrated isolated dc-to-dc
converter ±15 kV ESD protection
ADM3053E
Isolated CAN
transceiver
Signal and power isolated CAN transceiver, complies with ISO 11898 standard,
high speed data rates up to 1 Mbps
Integrated isolated dc-to-dc
Energy Meters
ADE7878 3-phase energy meter
Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1, less
than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at T
A
= 25°C
High performance, harmonic
analysis
ADE7953 1-phase energy meter
Less than 0.1% error in active and reactive energy measurement over a dynamic range of
3000:1, less than 0.2% error in instantaneous I rms and V rms measurements over a
dynamic range of 500:1
High performance,
wide dynamic range
Processors
ADP2114 DC-to-DC regulator
Configurable 3 A/1 A or 2 A/2 A dual output load combinations or 4 A combined single output,
high efficiency: up to 95%
Programmable frequencies,
single 4 A output
ADP2118 DC-to-DC regulator
3 A continuous output current, ±1.5% output accuracy, input voltage range from 2.3 V to 5.5 V
3 A continuous output current
Circuits from the Lab
™
Reference Circuits for Energy Management
Reference circuits are subsystem-level building blocks that have been engineered and tested for quick and easy integration.
• Layout Considerations for an Expandable Multichannel Simultaneous Sampling Data Acquisition System
(
DAS
)
Based on the AD7606 16-Bit,
8-Channel DAS
(
CN0148
)
www.analog.com/CN0148
• A Low Cost, 8-Channel, Simultaneously Sampled, Data Acquisition System with 84 dB SNR and Excellent Channel-to-Channel Matching
(
CN0175
)
www.analog.com/CN0175
• High Voltage, High Precision Current Sensing with Output Level Shifting Using the
AD8210 Current Sense Amplifier and the AD8274 Difference Amplifier
(
CN0116
)
www.analog.com/CN0116
If you need more ADI solar PV applications and products information,
please visit www.analog.com/energy.
Worldwide Technical Support www.analog.com/support
Engineer Zone Community ez.analog.com
Circuits from the Lab
Reference Circuits www.analog.com/circuits
www.analog.com/energy
©2011 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the
property of their respective owners.
BR09818-1-5/11