Leaet
Ideal Simulator Measuring Instrument
MG3700A Vector Signal Generator
MS2690A/91A/92A Signal Analyzer
•
Evaluate device by capturing IQ data from simulation software to simulate identical signal
•
Free IQproducer Convert function
For Evaluating Rx Characteristics
•
Capture 6-GHz RF signals in 125-MHz band (31.25-MHz band standard) with binary type IQ data
•
Capture IQ data with digitize function and analyze with current simulation software
For Evaluating Tx Characteristics
For details: http://www.anritsu.co.jp/j/products/tm/list.aspx?sID=18
Application Note [MG3700A MATLAB Application Note]
Introduction material [MG3700A Vector Signal Generator (arbitrary waveform generation function)]
For details: http://www.anritsu.co.jp/J/products/tm/list.aspx?sID=294
Application Note [MS269xA Digitize Function Introduction]
Ordering Information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.
MG3700A_MS269xA-E-A-2-(1.01) 18/JAN/2012 ddch/CDT
Advantages of MG3700A Vector Signal Generator
Cuts setup costs,
management burdens
Normally, the conventional measurement setup combines a general-purpose waveform
generator with an up-converting signal generator, but this all-in-one solution halves these costs
and cuts equipment management worries.
Cuts setup costs
The Fading IQproducer option generates waveform patterns under fading conditions.
Despite restrictions on replay times, evaluation and comparison with previous data are easy
even without a fading simulator.
Cuts workload
Adjusting delay in the waveform generator IQ output is difî‚¿cult, but this problem is solved simply
by selecting the waveform pattern.
Cuts future investments
The built-in, wideband baseband generator (120-MHz RF bandwidth) supports R&D into next-
generation communications.
Advantages of MS269xA Signal Analyzer
Cuts workload (1)
The resampling function reduces the workload at the simulation software side because it is
easier to use captured data with simulation software.
Cuts workload (2)
Usually, there are errors in captured data. However, the MS269xA stores error calibration data
to eliminate troublesome calibration at the simulation software side.
Cuts future costs
Installing the 125-MHz FFT analysis bandwidth option (31.25-MHz band standard) supports
R&D into next-generation communications.
Category Model Name
Main frame
MS2690A
MS2691A
MS2692A
Signal Analyzer (50 Hz to 6 GHz)
Signal Analyzer (50 Hz to 13.5 GHz)
Signal Analyzer (50 Hz to 26.5 GHz)
Mandatory
Hardware options
MS269xA-020
MS269xA-077
MS269xA-078
Vector Signal Generator (125 MHz to 6 GHz)
Analysis Bandwidth Extension to 62.5 MHz
Analysis Bandwidth Extension to 125 MHz Requires MS269xA-077
Category Model Name
Main frame MG3700A Vector Signal Generator (250 kHz to 3 GHz) Mandatory
Hardware options
MG3700A - 011
MG3700A-021
Upper Frequency 6 GHz
ARB Memory Upgrade 512 Msamples