Main Frame Measurement Functions

The MS269xA, MS2850A, MS2840A and MS2830A series of signal analyzers has the following built-in spectrum analyzer and signal analyzer

functions used in combination with measurement software.

• Spectrum • Channel Power • Occupied Bandwidth • Adjacent Channel Leakage Power

• Spectrum Emission Mask • Burst Average Power • Spurious Emission • AM Depth

• FM Deviation • Multi-marker & Marker List • Highest 10 Markers • Limit Line

• Frequency Counter • 2-tone 3rd-order Intermodulation Distortion • Annotation Display • Power vs. Time

• Frequency vs. Time • Phase vs. Time • CCDF/APD

• Spectrogram

: CCDF: Complementary Cumulative Distribution Function, APD: Amplitude Probability Density

Hardware Option (Measurement Functions)

The following measurement functions can be added as hardware options to the MS269xA, MS2850A, MS2840A and MS2830A series of

signal analyzers (depending on the model). For details refer to the relevant main-frame catalog.

Phase Noise Measurement Function, Noise Figure Measurement Function, Precompliance EMI Function, etc.

The Signal Analyzer MS269xA is the high-end model supporting best-of-class high-accuracy, a wide dynamic range and 125 MHz wideband

analysis.

The MS2850A, MS2840A and MS2830A are the mid-range model with excellent cost performance supporting superior RF performance,

best-of-class speed, and low power consumption.

Model Feature Frequency Range Analysis Bandwidth

MS269xA

(High-end model)

■ High level accuracy up to 6 GHz expandable to

5G, and 125 MHz wideband

■ 177 dB dynamic range without external filter for

spurious measurements

50 Hz to 6 GHz

50 Hz to 13.5 GHz

50 Hz to 26.5 GHz

31 .25 MHz (Standard)

62 .5 MHz (Option: MS269xA-077)

125 MHz (Option: MS269xA-078)

MS2850A

(Middle-range model)

■ Analysis bandwidth: 1 GHz max.

■ For R&D and manufacturing cost reduction of 5G

and wideband systems including microwave/

millimeter wave communications systems, such as

satellite broadcasting

9 kHz to 32 GHz

9 kHz to 44.5 GHz

255 MHz (Standard)

510 MHz (Option: MS2850A-033)

1 GHz (Option: MS2850A-034)

MS2840A

(Middle-range model)

■ Highest level phase noise performance among

middle-range models

■ High cost-performance ratio as replacement for

aging high-end models

9 kHz to 3.6 GHz

9 kHz to 6 GHz

9 kHz to 26.5 GHz

9 kHz to 44.5 GHz

31 .25 MHz (Standard)

62 .5 MHz (Option: MS2840A-077)

125 MHz (Option: MS2840A-078)

MS2830A

(Middle-range model)

■ High-speed, low-cost, low power consumption cuts

manufacturing costs

■ Environment-friendly energy saving design

■ Multiple versatile measurement options

9 kHz to 3.6 GHz

9 kHz to 6 GHz

9 kHz to 13.5 GHz

9 kHz to 26.5 GHz

9 kHz to 43 GHz

None (Standard)

10 MHz (Option: MS2830A-006)

31 .25 MHz (Option: MS2830A-005/009)

62 .5 MHz (Option: MS2830A-077)

125 MHz (Option: MS2830A-078)

: An image response is received when setting the bandwidth to more than 31.25 MHz.

This can be used when not inputting a signal frequency outside the MS2840A/MS2830A analysis bandwidth (125 MHz max.).

The Signal Analyzer MS2690A/91A/92A series is recommended for other measurement purposes.

MX2690xxA/MX2830xxA/MX2850xxA series Measurement Software

Signal Analyzers MS269xA, MS2830A, MS2840A and MS2850A