TLT
An ISO 9001:2000 Registered Company
Petersburgh, NY: Tel: 800-833-1805 Fax: 518-658-3988
Europe: Tel: +353-44-9395600 Fax: +353-44-9344369 Asia: Tel: +82-31-704-1858 Fax: +82-31-704-1857
www.taconic-add.com
Excellent Mechanical & Thermal Properties
Low Dissipation Factor
Low & Stable Dielectric Constant
UL 94 V-0 Rating
TLT
Taconic has over 40 years of experience coating berglass
fabric with PTFE (polytetrauoroethylene). This enables
Taconic to manufacture copper clad PTFE/woven glass
laminates with exceptionally well controlled electrical and
mechanical properties.
These attributes effectively extend the usefulness of these
laminates to X-Band and above.
The dielectric constant (DK) range is 2.45 to 2.65. The DK
can be specied anywhere within this range with a toler-
ance of +/- 0.05. The dissipation factor is approximately
0.0006 when measured at 1 MHz.
Typical applications for TLT laminates include radar sys-
tems, phased array antennas, mobile communication sys-
tems, microwave test equipment, microwave transmission
devices and RF components.
TLT laminates can be sheared, drilled, milled and plated
using standard methods for PTFE/woven berglass ma-
terials. The laminates are dimensionally stable, and ex-
hibit virtually no moisture absorption during fabrication
processes.
TLT laminates are generally ordered clad on both sides.
Various panel sizes are available. Contact our customer
service department for more information.
TLT laminates are tested in accordance with IPC-TM 650.
A certicate of compliance containing lot-specic test data
accompanies each shipment.
See “How To Order” on back page for a complete product
listing.
LNAs, LNBs, and LNCs
PCS/PCN Large Format
Antennas
High Power Ampliers
Passive Components
APPLICATIONS