1. General description
The JN5179-001-M1x (with x = 0, 3 or 6) module family provides designers with a
ready-made compone nt that provide s a fully in tegrated solution for applica tions, using the
IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee
Smart Energy and Home Automation and can be quickly and easily included in product
designs. The modules integrate all of the RF components required, removing the need to
perform expensive RF design and test. Products can be designed by simply connecting
sensors and switches to the module IO pins. The modules use NXP’s single chip
IEEE802.15.4 wireless microcontroller, allowing designers to make use of the extensive
chip developm en t su ppor t ma terial. Hence, this range of modules allows designers to
bring wireless applications to market in the minimum time with significantly reduced
development effort and cost.
3 variants are available: JN5179-001-M10, JN5179-001-M13 and JN5179-001-M16. All
modules have FCC modular approval. The JN5179-001-M10 and JN5179-001-M13 are
also CE-compliant and subject to a Notified Body Opinion.
The variants available are described in the Table 1
.
1.1 Regulatory Approvals
The JN5179-001-M10 and JN5179-001-M13 have been tested against the requirements
of the following European standards.
• Radio EN 300 328 v 1.9.1
• EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2
• Basic Safety Assessment (BSA) EN 60950-1:2006
A Notified Body statement of opinion for this standard is available on request.
The High-power module with M16 suffix is not approved for use in Eur ope.
Additionally, both module types have received FCC “Modular Approval”, in compliance
with CFR 47 FCC part 15 r egulations and in accordance to FCC public notice DA00-1 407.
The modular approvals notice and test report s are available on request.
The JN5179-001- M16 module is subject to user proximity restrictions under FCC
regulations; more specific information is available in Section 13.1.2
.
JN5179-001-M1x
ZigBee 3.0, ZigBee PRO, Thread and IEEE802.15.4 modules
Rev. 2.0 — 26 October 2016 Product data sheet
JN5179-001-M1x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet Rev. 2.0 — 26 October 2016 2 of 28
NXP Semiconductors
JN5179-001-M1x
ZigBee 3.0, ZigBee PRO, Thread and IEEE802.15.4 modules
2. Features and benefits
2.1 Benefits
Microminiature module solutions
Ready to use in prod u cts
Minimizes product development time
No RF test required for systems
Compliant with:
FCC 47CFR Part 15C
ETSI EN 300 328 V1.9
EN 301-489-17 V2.2.1
EN60950-1-2006
Temperature range: 40 C to +85 C
Lead-free and RoHS compliant
2.2 Features: modules
2.4 GHz IEEE 802.15.4, ZigBee Smart Energy and Home Automation compatible
JN5179-001-M10
Dimensions: 14.5 mm 20.5 mm
Integrated printed antenna
TX power 8.5 dBm/10 dBm
Receiver sensitivity –96 dBm
TX current 24 mA at 10 dB m
TX current 21.2 mA at 8.5 dBm
RX current 14.3 mA at maximum input level –2 dBm
2.0 V/3.6 V operation
JN5179-001-M13
Dimensions: 14.5 mm 20.5 mm
Fl connector
TX power 8.5 dBm/10 dBm
Receiver sensitivity –96 dBm
TX current 24 mA at 10 dB m
TX current 21.2 mA at 8.5 dBm
RX current 14.3 mA at maximum input level –2 dBm
2.0 V/3.6 V operation
JN5179-001-M16
Dimensions: 14.5 mm 20.5 mm
Integrated printed antenna and Fl connector
Antenna diversity
TX power 21 dBm
Receiver sensitivity –100 dBm
TX current 114 mA at 21 dBm
RX current 19 mA at maximum input level –11 dBm