1. General description

The JN5169-001-M0x-2 (with x = 0, 3 or 6) module family provides designers with a

ready-made compone nt that provide s a fully inte grated solution for applications, using th e

IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee

3.0 and ZigBee PRO stack with Home Autom ation, Light Link and Smart Energy profiles.

The modules integrate all of the RF components required, removing the need to perform

expensive RF design and test. Products can be designed by simply connecting sensors

and switches to the module IO pins. The modules use NXP’s single chip IEEE802.15.4

wireless microcontroller, allowing designers to make use of the extensive chip

development support material. Hence, this range of modules allows designers to bring

wireless applications to market in the minimum time with significantly reduced

development effort and cost.

3 variants are available: JN5169-001-M00-2, JN5169-001-M03-2 and

JN5169-001-M06-2. All modules have FCC modular approval. The JN5169-001-M00-2

and JN5169-001-M03-2 are also CE-compliant and subject to a Notified Body Opinion.

The variants available are described in the Table 1

1.1 Regulatory Approvals

The JN5169-001- M00-2 and JN5169-001-M03-2 have been tested against the

requirements of the following European standards.

• Radio EN 300 328 v 1.9.1

• EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2

• Basic Safety Assessment (BSA) EN 60950-1:2006

A Notified Body statement of opinion for this standard is available on request.

The High-power module with M06 suffix is not approved for use in Europe.

Additionally, both module types have received FCC “Modular Approval”, in compliance

with CFR 47 FCC part 15 r egulations and in accordance to FCC public notice DA00-1 407.

The modular approvals notice and test reports are available on request.

The JN5169-001-M06-2 module is subject to user proximity restrictions under FCC

regulations; more specific information is available in Section 13.1.2

JN5169-001-M0x-2

ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules

Rev. 3.0 — 19 September 2016 Product data sheet

Product data sheet Rev. 3.0 — 19 September 2016 2 of 27

NXP Semiconductors

JN5169-001-M0x-2

ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules

2. Features and benefits

2.1 Benefits

 Microminiature module solutions

 Ready to use in prod u cts

 Minimizes product development time

 No RF test required for systems

 Compliant with:

 FCC 47CFR Part 15C

 ETSI EN 300-328 V1.9

 EN 301-489-17 V2.2.1

 EN60950-1-2006

 Temperature range: 40 C to +85 C

 Lead-free and RoHS compliant

2.2 Features: modules

 2.4 GHz IEEE 802.15.4, ZigBee 3.0 and ZigBee PRO stack with Home Automation,

Light Link and Smart Energy compatible

 JN5169-001-M00-2

 Dimensions: 16 mm  30 mm

 Integrated printed antenna

 TX power 8.5 dBm/10 dBm

 Receiver sensitivity –96 dBm

 TX current 27.2 mA at 10 dBm

 TX current 23.6 mA at 8.5 dBm

 RX current 17.8 mA at maximum input level 10 dBm

 RX current 16.2 mA at maximum input level 0 dBm

 2.0 V/3.6 V operation

 JN5169-001-M03-2

 Dimensions: 16 mm  21 mm

 Fl connector

 TX power 8.5 dBm/10 dBm

 Receiver sensitivity –96 dBm

 TX current 27.2 mA at 10 dBm

 TX current 23.6 mA at 8.5 dBm

 RX current 17.8 mA at maximum input level 10 dBm

 RX current 16.2 mA at maximum input level 0 dBm

 2.0 V/3.6 V operation

 JN5169-001-M06-2

 Dimensions: 16 mm  30 mm

 Fl connector

 TX power 22 dBm

 Receiver sensitivity –100 dBm

 TX current 181 mA at 22 dBm